User Guide
10S
37
English
12.3 Seek and Save
“Seek” is the function that searches for station to station frequencies.
To use the “Seek” function, please follow the procedure below:
1. Rotate while pressing the Jog Dial clockwise or counter-clockwise
to search down or up the station dial.
2. If the tuner nds a station while searching frequencies, it stops
the seek function.
3. To save the current station, press and hold the Jog Dial for 1
second until you hear a voice prompt, “Preset (#)”.
4. Rotate the Jog Dial in order to select which preset number you
want for that specic station. You can save up to 10 preset stations.
(You may cancel the preset operation by waiting approximately
10 seconds. You will then hear “Save preset cancelled”. You
can also rotate the Jog Dial until you hear “Cancel”. Tap the
Jog Dial to conrm cancellation. You will then hear “Save preset
cancelled”.)
5. To save the current station, tap the Jog Dial again. You will then
hear a voice prompt, “Save preset (#)”.
6. To delete the saved station in the preset number, tap the Phone
Button. You will then hear a voice prompt, “Delete preset (#)”.
Note:
1. You can save FM stations to presets before using FM radio. Connect the
10S to your PC and open the Sena Device Manager. It allows you to save
up to 10 FM station frequency presets on the 10S settings menu. You may
do the same operation by using the Sena Smartphone App.
2. You can still answer an incoming phone call and intercom while listening
to the FM radio.
12.4 Scan and Save
“Scan” is the function that automatically searches station frequencies,
starting from the current frequency and up. To use the scan function,
please follow the procedures below:
1. Double tap the Phone Button. Then the current station frequency
moves upward to nd other station frequencies.
2. If the tuner nds a station, it stays at the station frequency for 8
seconds, then scanning to the next station frequency.
3. Scan function stops when you double tap the Phone Button again.
4. To save a station while scanning frequencies, tap the Phone
Button when at that station. You will hear a voice prompt from
the 10S, “Save preset (#)”. The station will be saved as the next
preset number.
5. All stations preset during “Scan”, will overwrite previously set
stations.