User Guide

10S

English

17.4 Factory Reset

1. To restore the 10S to factory default settings, press and hold the

Phone Button for 10 seconds until the LED shows solid red and

you hear “Factory reset”.

2. Within 10 seconds, press the Jog Dial to conrm reset. The headset

will be restored to factory setting and switched off automatically.

You will hear, “Headset reset, goodbye”.

3. If you press the Phone Button or leave the Jog Dial for 10 seconds,

the reset attempt is cancelled and the headset returns to stand-by

mode. You will hear a voice prompt, “Cancelled”.

17.3 Fault Reset

When the 10S is not working properly or is in faulty status for any

reason, you may reset by pushing the pin-hole reset button. Insert a

paper clip into the reset pin-hole and press the reset button for a

second with light pressure. The 10S will be switched off. Restart the

system and try again. This will not restore the headset to factory

default settings.