User Manual
Table Of Contents
- 1 INTRODUCTION
- 2 PACKAGE CONTENTS
- 3 INSTALLING THE 20S ON YOUR HELMET
- 4 GETTING STARTED
- 5 PAIRING THE 20S WITH BLUETOOTH DEVICES
- 6 PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE
- 7 MOBILE PHONE CALL MAKING AND ANSWERING
- 8 STEREO MUSIC
- 9 GPS NAVIGATION
- 10 SENA SR10, TWO-WAY RADIO ADAPTER
- 11 FM RADIO
- 12 AMBIENT MODE
- 13 VOICE COMMAND
- 14 INTERCOM PAIRING
- 15 TWO-WAY & MULTI-WAY INTERCOM
- 16 THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- 17 GROUP INTERCOM
- 18 UNIVERSAL INTERCOM
- 19 FUNCTION PRIORITY
- 20 20S CONFIGURATION SETTING
- 20.1 Assigning Speed Dial
- 20.2 Enabling/Disabling Audio Multitasking
- 20.3 Setting Intercom-audio Overlay Sensitivity
- 20.4 Enabling/Disabling Navigation App Support
- 20.5 Enabling/Disabling Audio Boost
- 20.6 Setting Motion Sensor Sensitivity
- 20.7 Enabling/Disabling Voice Activated Phone Answering
- 20.8 Enabling/Disabling HD Intercom
- 20.9 Enabling/Disabling Eight-way Intercom
- 20.10 Enabling/Disabling Voice Prompts
- 20.11 Enabling/Disabling Sidetone
- 20.12 Enabling/Disabling Advanced Noise Control™
- 20.13 Delete All Bluetooth Pairing Information
- 20.14 Universal Intercom Pairing
- 20.15 Exit Voice Configuration Menu
- 21 RESET TO FACTORY DEFAULT SETTINGS
- 22 FAULT RESET
- 23 FIRMWARE UPGRADE
- 24 SENA BLUETOOTH CONNECTION CASE STUDIES
- 25 OPERATION QUICK REFERENCE
- CERTIFICATION AND SAFETY APPROVALS
- SAFETY INFORMATION
- PRODUCT WARRANTY AND DISCLAIMER
20S
27
English
11.4 Scan and Save
"Scan" is the function that automatically searches station frequencies,
starting from the current frequency and up. To use the scan function,
please follow the procedures below:
1. Double tap the Phone Button. Then the current station frequency
moves upward to nd other station frequencies.
2. If the tuner nds a station, it stays at the station frequency for 8
seconds, then scanning to the next station frequency.
3. Scan function stops when you double tap the Phone Button again.
4. To save a station while scanning frequencies, tap the Phone
Button when at that station. You will hear a voice prompt from the
20S saying “Save preset (#)”. The station will be saved as the
next preset number.
5. All stations preset during “Scan”, will overwrite previously set
stations.
11.5 Temporary Preset
With the temporary preset function, you may temporarily preset stations
automatically without changing the existing preset stations. Tap the
Phone Button three times to automatically scan for 10 temporary
preset stations. The temporary preset stations will be cleared when
the system is powered off.
11.6 Region Selection
You can select proper FM frequency region from the Device Manager.
With the region setting, you may optimize seek function to avoid
unnecessary frequency range (Factory default: worldwide).
Region Frequency range Step
Worldwide 76.0 ~ 108.0 MHz ± 100 kHz
Americas 87.5 ~ 107.9 MHz ± 200 kHz
Asia 87.5 ~ 108.0 MHz ± 100 kHz
Australia 87.5 ~ 107.9 MHz ± 200 kHz
Europe 87.5 ~ 108.0 MHz ± 100 kHz
Japan 76.0 ~ 90.0 MHz ± 100 kHz