User Manual
Table Of Contents
- 1 INTRODUCTION
- 2 PACKAGE CONTENTS
- 3 INSTALLING THE 20S ON YOUR HELMET
- 4 GETTING STARTED
- 5 PAIRING THE 20S WITH BLUETOOTH DEVICES
- 6 PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE
- 7 MOBILE PHONE CALL MAKING AND ANSWERING
- 8 STEREO MUSIC
- 9 GPS NAVIGATION
- 10 SENA SR10, TWO-WAY RADIO ADAPTER
- 11 FM RADIO
- 12 AMBIENT MODE
- 13 VOICE COMMAND
- 14 INTERCOM PAIRING
- 15 TWO-WAY & MULTI-WAY INTERCOM
- 16 THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- 17 GROUP INTERCOM
- 18 UNIVERSAL INTERCOM
- 19 FUNCTION PRIORITY
- 20 20S CONFIGURATION SETTING
- 20.1 Assigning Speed Dial
- 20.2 Enabling/Disabling Audio Multitasking
- 20.3 Setting Intercom-audio Overlay Sensitivity
- 20.4 Enabling/Disabling Navigation App Support
- 20.5 Enabling/Disabling Audio Boost
- 20.6 Setting Motion Sensor Sensitivity
- 20.7 Enabling/Disabling Voice Activated Phone Answering
- 20.8 Enabling/Disabling HD Intercom
- 20.9 Enabling/Disabling Eight-way Intercom
- 20.10 Enabling/Disabling Voice Prompts
- 20.11 Enabling/Disabling Sidetone
- 20.12 Enabling/Disabling Advanced Noise Control™
- 20.13 Delete All Bluetooth Pairing Information
- 20.14 Universal Intercom Pairing
- 20.15 Exit Voice Configuration Menu
- 21 RESET TO FACTORY DEFAULT SETTINGS
- 22 FAULT RESET
- 23 FIRMWARE UPGRADE
- 24 SENA BLUETOOTH CONNECTION CASE STUDIES
- 25 OPERATION QUICK REFERENCE
- CERTIFICATION AND SAFETY APPROVALS
- SAFETY INFORMATION
- PRODUCT WARRANTY AND DISCLAIMER
20S
40
19 FUNCTION PRIORITY
The 20S operates in the following order of priority:
(highest) Voice command mode
Ambient mode
Mobile phone
Intercom
Stereo music by audio cable
Music sharing by Bluetooth stereo music
FM Radio
(lowest) Bluetooth stereo music
A lower priority function is always interrupted by a higher priority
function. For example, stereo music is interrupted by intercom call,
and intercom conversation is interrupted by incoming mobile phone
call.
20 20S CONFIGURATION SETTING
You can set the conguration of the 20S by the voice menu instruction
as below.
1. To enter into voice conguration menu, press and hold the Jog
Dial for 12 seconds until the LED shows solid blue and you hear
high tone double beeps. You will also hear a voice prompt saying
“Conguration menu”.
2. Rotate the Jog Dial clockwise or counter-clockwise to navigate
between the menus. You will hear voice prompts for each menu
item as below.
3. You can enable the feature or execute the command by tapping
the Phone Button, or disable the feature by tapping the Jog Dial.
4. If any button is not pressed within 10 seconds, the 20S will exit the
conguration and go back to stand-by.
5. If you want to exit the conguration immediately, rotate the Jog
Dial until you hear a voice prompt saying “Exit conguration”,
and tap the Phone Button.