User Manual

20S
43
English
20.4 Enabling/Disabling Navigation App Support
Voice Prompt
“Navigation app support”
Factory Default Disable
Enable Tap the Phone Button
Disable Tap the Jog Dial
When Audio Multitasking is enabled, your smartphone’s GPS
application reduces in volume whenever there is an ongoing intercom
conversation. To listen to your smartphone’s GPS navigation clearly
without this volume reduction, enable Navigation App Support.
Note:
The volume level of the music will not be reduced during an intercom
conversation when the Navigation App Support setting is enabled.
20.5 Enabling/Disabling Audio Boost
Voice Prompt
“Audio boost”
Factory Default Enable
Enable Tap the Phone Button
Disable Tap the Jog Dial
Audio Boost increases the overall maximum volume. Disabling Audio
Boost will reduce the overall maximum volume.
20.6 Setting Motion Sensor Sensitivity
Voice Prompt
“Motion sensor sensitivity”
Factory Default High
Level Adjustment
Rotate the Jog Dial
(High/Low/Disable)
Apply Tap the Phone Button
Motion Sensor Sensitivity determines the sensitivity when you double
tap on the surface of the 20S to enter voice command mode. Rotate the
Jog Dial until you hear the voice prompt, “Motion sensor sensitivity”.
By tapping the Phone Button, it will lead you to level adjustment mode.
Default is at high, but you may change it to low, or disable the feature
by rotating the Jog Dial. After you have completed the setting, tap
the Phone Button to apply the changes. If this feature does not work
properly, disable this feature, and press on the Ambient Mode Button
to enter voice command mode.