User Manual

ManualsBrandsSena ManualsAccessoriesSena 20S-01 Motorcycle Bluetooth 4.1 Communication System with HD Audio and Advanced Noise Control (Single)

Table Of Contents

1 INTRODUCTION
2 PACKAGE CONTENTS
3 INSTALLING THE 20S ON YOUR HELMET
- 3.1 Helmet Installation
- 3.2 Glued Surface Mounting Adapter
- 3.3 Switching the Microphone
4 GETTING STARTED
- 4.1 Charging
- 4.2 Low Battery Warning
- 4.3 Checking the Battery Level
- 4.4 Powering On and Off
- 4.5 Volume Adjustment
- 4.6 Software
5 PAIRING THE 20S WITH BLUETOOTH DEVICES
- 5.1 Mobile Phone Pairing
- 5.2 Second Mobile phone Pairing
- 5.3 Bluetooth Stereo Device Pairing
- 5.4 Bluetooth GPS Navigation Pairing
- 5.5 Pairing with the Sena SR10, Bluetooth Two-way Radio Adapter
6 PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE
7 MOBILE PHONE CALL MAKING AND ANSWERING
- 7.1 Mobile Phone Call Making and Answering
- 7.2 Speed Dialing
- 7.3 Intercom and Mobile Phone Call
8 STEREO MUSIC
- 8.1 By Stereo Audio Cable
- 8.2 By Bluetooth Wireless Stereo
- 8.3 Music Sharing
9 GPS NAVIGATION
10 SENA SR10, TWO-WAY RADIO ADAPTER
11 FM RADIO
- 11.1 FM Radio On / Off
- 11.2 Preset Stations
- 11.3 Seek and Save
- 11.4 Scan and Save
- 11.5 Temporary Preset
- 11.6 Region Selection
12 AMBIENT MODE
13 VOICE COMMAND
14 INTERCOM PAIRING
- 14.1 Pairing with Other 20S Headsets for Intercom Conversation
- 14.2 Pairing with Other Sena Headset Models for Intercom Conversation
15 TWO-WAY & MULTI-WAY INTERCOM
- 15.2 Multi-way Intercom
- 15.3 Intercom Failure
- 15.4 Intercom Reconnection
16 THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
17 GROUP INTERCOM
18 UNIVERSAL INTERCOM
- 18.1 Universal Intercom Pairing
- 18.2 Two-way Universal Intercom
- 18.3 Three-way Universal Intercom
- 18.4 Four-way Universal Intercom
19 FUNCTION PRIORITY
20 20S CONFIGURATION SETTING
- 20.1 Assigning Speed Dial
- 20.2 Enabling/Disabling Audio Multitasking
- 20.3 Setting Intercom-audio Overlay Sensitivity
- 20.4 Enabling/Disabling Navigation App Support
- 20.5 Enabling/Disabling Audio Boost
- 20.6 Setting Motion Sensor Sensitivity
- 20.7 Enabling/Disabling Voice Activated Phone Answering
- 20.8 Enabling/Disabling HD Intercom
- 20.9 Enabling/Disabling Eight-way Intercom
- 20.10 Enabling/Disabling Voice Prompts
- 20.11 Enabling/Disabling Sidetone
- 20.12 Enabling/Disabling Advanced Noise Control™
- 20.13 Delete All Bluetooth Pairing Information
- 20.14 Universal Intercom Pairing
- 20.15 Exit Voice Configuration Menu
21 RESET TO FACTORY DEFAULT SETTINGS
22 FAULT RESET
23 FIRMWARE UPGRADE
24 SENA BLUETOOTH CONNECTION CASE STUDIES
25 OPERATION QUICK REFERENCE
CERTIFICATION AND SAFETY APPROVALS
- FCC Compliance Statement
- FCC RF Exposure Statement
- FCC Caution
- CE Declaration of Conformity
- Industry Canada Statement
- Bluetooth License
- WEEE (Waste Electrical and Electronic Equipment)
SAFETY INFORMATION
- Product Storage and Management
- Product Use
- Battery
PRODUCT WARRANTY AND DISCLAIMER
- Limited Warranty
- Warranty Exclusions
- Warranty Service
- Return for Full Refund

20S

Case 2

Mobile Phone

Bluetooth GPS

Mobile Phone

Pairing

GPS - Mobile

Phone Pairing

Intercom

Pairing

Bluetooth Pairing Procedure

1 GPS - Mobile Phone Pairing

2 Mobile Phone Pairing

3 Intercom Pairing

Bluetooth GPS

zumo 550/660/665, TomTom Rider

Usage

• GPS

zumo 660/665: GPS instruction, phone call, listening to music

zumo 550, TomTom Rider: GPS instruction, phone call

• Intercom

Case 3

Mobile Phone

Bluetooth GPS

Mobile Phone

Pairing

Second Mobile

Phone Pairing

Intercom

Pairing

Bluetooth Pairing Procedure

Mobile Phone Pairing

2 Second Mobile Phone Pairing

3 Intercom Pairing

Bluetooth GPS

zumo 220/350/550/660/665, TomTom Rider

Usage

• Mobile Phone: phone call

• GPS

zumo 660/665: GPS instruction, listening to music

zumo 220/350/550, TomTom Rider: GPS instruction

• Intercom