User Manual
Table Of Contents
- 1 INTRODUCTION
- 2 PACKAGE CONTENTS
- 3 INSTALLING THE 20S ON YOUR HELMET
- 4 GETTING STARTED
- 5 PAIRING THE 20S WITH BLUETOOTH DEVICES
- 6 PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE
- 7 MOBILE PHONE CALL MAKING AND ANSWERING
- 8 STEREO MUSIC
- 9 GPS NAVIGATION
- 10 SENA SR10, TWO-WAY RADIO ADAPTER
- 11 FM RADIO
- 12 AMBIENT MODE
- 13 VOICE COMMAND
- 14 INTERCOM PAIRING
- 15 TWO-WAY & MULTI-WAY INTERCOM
- 16 THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- 17 GROUP INTERCOM
- 18 UNIVERSAL INTERCOM
- 19 FUNCTION PRIORITY
- 20 20S CONFIGURATION SETTING
- 20.1 Assigning Speed Dial
- 20.2 Enabling/Disabling Audio Multitasking
- 20.3 Setting Intercom-audio Overlay Sensitivity
- 20.4 Enabling/Disabling Navigation App Support
- 20.5 Enabling/Disabling Audio Boost
- 20.6 Setting Motion Sensor Sensitivity
- 20.7 Enabling/Disabling Voice Activated Phone Answering
- 20.8 Enabling/Disabling HD Intercom
- 20.9 Enabling/Disabling Eight-way Intercom
- 20.10 Enabling/Disabling Voice Prompts
- 20.11 Enabling/Disabling Sidetone
- 20.12 Enabling/Disabling Advanced Noise Control™
- 20.13 Delete All Bluetooth Pairing Information
- 20.14 Universal Intercom Pairing
- 20.15 Exit Voice Configuration Menu
- 21 RESET TO FACTORY DEFAULT SETTINGS
- 22 FAULT RESET
- 23 FIRMWARE UPGRADE
- 24 SENA BLUETOOTH CONNECTION CASE STUDIES
- 25 OPERATION QUICK REFERENCE
- CERTIFICATION AND SAFETY APPROVALS
- SAFETY INFORMATION
- PRODUCT WARRANTY AND DISCLAIMER
20S
57
English
25 OPERATION QUICK REFERENCE
Type Function Button Command
Voice
Command
LED Beep
Basic
Function
Power-on
Press the Phone
Button and the Jog
Dial for 1 second
- Solid blue
Ascending
beeps
Power-off
Press the Phone
Button and the
Jog Dial
- Solid red
Descending
beeps
Volume
adjustment
Rotate the Jog Dial - - -
Voice
command
Double tap the
surface of the main
unit
“Hello Sena!”
Green flashing -
Ambient Mode
Double tap the
Ambient Mode
Button
- Green flashing -
Mobile
Phone
Mobile phone
pairing
Press the Phone
Button for 5
seconds
-
Blue & red
alternatively
flashing
High tone
multiple beeps
Second
mobile phone
pairing
Press the Jog Dial
for 6 seconds
- Red flashing Multiple beeps
Tap the Phone Button within 2 seconds
GPS pairing
Press the Jog Dial
for 6 seconds
- Red flashing Multiple beeps
Tap the Phone Button within 2 seconds
Tap the Phone Button again within 2 seconds
Type Function Button Command
Voice
Command
LED Beep
Mobile
Phone
Call transfer
Press the Phone
Button for 2
seconds
- -
High tone
single beep
Answer & end
phone call
Tap the Phone
Button
- - -
Voice dial
Tap the Phone
Button
- - -
Speed dial
Double Tap the
Phone Button
“Speed dial
[one, two, three]
”
-
Mid-tone
single beep
Reject
incoming call
Press the Jog Dial
for 2 seconds
- - -
Intercom
Intercom
pairing
Press the Jog Dial
for 6 seconds
“Pairing
intercom”
Red flashing
Mid-tone
single beep
Tap the Jog Dial of any one of the two headsets
Start/End
each intercom
Tap the Jog Dial
“Intercom
[one, two … nine]
”
- -
End all
intercoms
Press the Jog Dial
for 2 seconds
“End
intercom”
Blue flashing
Mid-tone
double beeps
Start Group
Intercom
Press the Ambient
Mode Button for 1
second
“Group
intercom”
Green flashing -
Music
Play/Pause
Bluetooth
music
Press the Jog Dial
for 1 second
“Music”
-
Mid-tone
double beeps
Track forward/
back
Rotate the Jog Dial
while pressing
“Next”/
“Previous”
- -