User Manual

English

20S EVO

5 PAIRING THE 20S EVO WITH BLUETOOTH

DEVICES

Before using the 20S EVO Bluetooth headset with any Bluetooth

devices for the rst time, you will need to pair them together. It can be

paired with Bluetooth mobile phones, Bluetooth stereo devices such

as MP3 players, or motorcycle specic Bluetooth GPS navigation,

and with other Sena Bluetooth headsets. This pairing operation is only

required once for each Bluetooth device. The headset remains paired

with the devices and automatically reconnects to them when they are

within range. You will hear a high tone single beep and a voice prompt

when the headset connects to the paired device automatically:

“Phone connected” to a mobile phone, “Media connected” to a

Bluetooth stereo device.

5.1 Mobile Phone Pairing

5.1.1 General Mobile Phone Pairing

1. Turn on the 20S EVO and press the Phone Button for 5 seconds

until the LED ashes red and blue alternately and you hear multiple

beeps. You will hear a voice prompt saying “Phone pairing”.

2. Search for Bluetooth devices on your mobile phone. Select the

20S EVO in the list of the devices detected on the mobile phone.

3. Enter 0000 for the PIN. Some mobile phones may not ask for the

PIN.

4. The mobile phone conrms that pairing has completed and the

20S EVO is ready to use. You will hear a voice prompt from the

20S EVO saying “Your headset is paired”.

5. If the pairing process is not completed within three minutes, the

20S EVO will return to stand-by mode.