User Manual

20S EVO

5.1.2 NFC Mobile Phone Pairing

You can quickly pair your mobile phone using NFC (Near Field

Communication) technology with your NFC-enabled mobile phone.

1. Make sure that your mobile phone has the NFC function turned on

and that the phone screen is active.

2. Turn on the 20S EVO and remove the main unit from the clamp

unit.

3. Place your mobile phone over the back side of the 20S EVO so

that the NFC detection area of each device touches each other.

4. Follow the pairing instructions that appear on your phone. If a

passcode is required, enter “0000”.

5. The mobile phone conrms that pairing has completed and the

20S EVO is ready to use.

6. Reattach the 20S EVO to the clamp unit.

5.2 Second Mobile Phone Pairing

Typical Bluetooth headsets can connect with only one Bluetooth

device, but a second mobile phone pairing allows the headset to

connect with another Bluetooth device such as a second mobile

phone, an MP3 Player, or the Sena SR10, the Bluetooth adapter.

1. To pair the second mobile phone, press the Jog Dial for 6 seconds

until the red LED is rapidly ashing and you hear multiple beeps.

2. Within 2 seconds, tap the Phone Button again, then the LED turns

to blue ashing and the beeps turn to high toned double beeps.

You will hear a voice prompt saying “Second mobile phone

pairing”.

3. Search for Bluetooth devices on your mobile phone. Select the

20S EVO in the list of the devices detected on the mobile phone.

4. Enter 0000 for the PIN. Some mobile phones may not ask for the

PIN.

5. The mobile phone conrms that pairing has completed and the

20S EVO is ready to use. You will hear a voice prompt from the

20S EVO saying “Your headset is paired”.

6. If you want to pair the Sena SR10, Bluetooth adapter, please refer

to the section 5.5, “Pairing with the Sena SR10, Bluetooth Two-

way Radio Adapter”.

Note:

If you have two audio (A2DP) devices connected to your headset then the

audio from one device will interrupt the audio from the other device. For

example, if you are playing music from the primary mobile phone, then it

can be interrupted by playing music from the secondary mobile phone and

vice versa.