User Manual

47
English
20S EVO
19 REMOTE CONTROL
You can remotely control the 20S EVO via Bluetooth using the Remote
Control (sold separately). This eliminates the need to take off your
hand for button operations. Your 20S EVO and the Remote Control
must be paired together before use.
1. Turn on the 20S EVO and the Remote Control.
2. Press the Jog Dial for 12 seconds to enter the conguration
menu. Rotate the Jog Dial until you hear a voice prompt saying,
“Remote control pairing”. Press the Phone Button to enter into
Remote Control Pairing mode and the red LED will ash rapidly
and you will hear multiple beeps. Please refer to section 21.16,
“Remote Control Pairing” for more details.
3. Enter Bluetooth pairing mode on your Remote Control. The 20S
EVO will automatically perform pairing with the Remote Control
in pairing mode. You will hear a voice prompt, “Remote control
connected”, when they are successfully connected.
20 FUNCTION PRIORITY
The 20S EVO operates in the following order of priority:
(highest) Voice command mode
Ambient mode
Mobile phone
Intercom
Stereo music by audio cable
Music sharing by Bluetooth stereo music
FM Radio
(lowest) Bluetooth stereo music
A lower priority function is always interrupted by a higher priority
function. For example, stereo music is interrupted by intercom call,
and intercom conversation is interrupted by incoming mobile phone
call.