User Manual

55
English
20S EVO
21.14 Enabling/Disabling Advanced Noise Control™
Voice Prompt
“Noise control”
Factory Default Enable
Enable Tap the Phone Button
Disable Tap the Jog Dial
When Advanced Noise Control is enabled, the background noise is
reduced during an intercom conversation. When it is disabled, the
background noise is mixed with your voice during intercom.
Note:
If you use your 20S EVO with the Bluetooth Audio Pack for GoPro, you can
enable or disable this feature only during Normal Voice Recording. This
feature is automatically disabled while in Ultra HD (UHD) Voice Recording
mode.
21.15 Delete All Bluetooth Pairing Information
Voice Prompt
“Delete all pairings”
Factory Default N/A
Execute Tap the Phone Button
To delete all Bluetooth pairing information of the 20S EVO, rotate the
Jog Dial until you hear a voice prompt saying “Delete all pairings”,
and tap the Phone Button to conrm. Tapping the Jog Dial is not
available for this setting.
21.16 Remote Control Pairing
Voice Prompt
“Remote control pairing”
Factory Default N/A
Execute Tap the Phone Button
To enter into Remote Control Pairing mode, rotate the Jog Dial until
you hear a voice prompt, “Remote control pairing”. Then press the
Phone Button to enter into Remote Control Pairing mode. The headset
will automatically exit from the conguration menu. Please refer to
section 19 for details on remote control.