User Manual

English

20S EVO

22 RESET TO FACTORY DEFAULT SETTINGS

1. To restore the 20S EVO to factory default settings, press and hold

the Phone Button for 12 seconds until the LED shows solid red

and you hear double beeps. You will hear a voice prompt saying

“Factory reset”.

2. Within 5 seconds, press the Jog Dial to conrm reset. The headset

will be restored to factory setting and switched off automatically.

You will hear a voice prompt saying “Headset reset, good-bye”.

3. If you press the Phone Button or don’t press the Jog Dial within 5

seconds, the reset attempt is canceled and the headset returns to

stand-by mode. You will hear a voice prompt saying “Canceled”

23 FAULT RESET

When the 20S EVO is not working properly or is in faulty status for

any reason, you may reset by pushing the pin-hole reset button at the

back of the headset main unit. Insert a paper clip into the reset pin-

hole and press the reset button for a second with light pressure. The

20S EVO will be switched off, and you have to turn the system back

on and try again. However, this will not restore the headset to factory

default settings.