SENA EXPAND Bluetooth® Stereo Headset & Intercom www.sena.
EXPAND © 1998-2016 Sena Technologies Inc. All rights reserved. Sena Technologies Inc. reserves the right to make any changes and improvements to its product without prior notice. Sena™ is a trademark of Sena Technologies Inc. or its subsidiaries in the USA and other countries. PRISM™, 20S™, 3S™, SMH10™, SMH10R™, SMH5™, SMH5-FM™, SPH10™, EXPAND™, SPH10H™, SPH10H-FM™, SPH10S™, SR10™, SR10i™, SM10™, EXPAND™, Bluetooth Pack for GoPro® are trademarks of Sena Technologies, Inc. or its subsidiaries.
EXPAND 1. INTRODUCTION...................................................... 5 2. PACKAGE CONTENTS........................................... 6 3. GETTING STARTED........................................... 7 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 Wearing the Sena Expand ................................... 7 Installing the Microphone Windscreen.................. 8 Powering On......................................................... 8 Powering Off.........................................................
EXPAND 9. INTERCOM............................................................ 22 9.1 Pairing with Other Sena Expand Headsets for Intercom Conversation........................................ 22 9.2 Pairing with Other Sena Headset Models for Intercom Conversation........................................ 23 9.3 Two-way Intercom............................................... 24 9.4 Three-way Intercom............................................ 26 9.5 Four-way Intercom...........................................
EXPAND The Sena Expand is a Bluetooth Stereo headset with long-range Bluetooth intercom designed specifically for outdoor sports activities. With the Sena Expand, you can listen to stereo music, call handsfree on their Bluetooth mobile phone, and have intercom conversations in full duplex with up to four companions. Also, the easy-to-access and intuitive headset makes the Sena Expand a perfect companion for outdoor sports. The Sena Expand is compliant with Bluetooth 3.
EXPAND 2.
EXPAND USB Power & Data Cable English 3. GETTING STARTED 3.1 Wearing the Sena Expand Proper fit on your ear and head is important both for comfort and optimal noise-reduction performance. The speaker with microphone should be placed on the left ear. Then you can place earhooks over ears and pull the microphone in toward your lips as positioning the microphone with its talk side facing in as shown below.
EXPAND 3.2 Installing the Microphone Windscreen The microphone windscreen helps you to cut down incoming microphone wind noise by protecting the microphone from the wind and provide clearer voice audio sound under the circumstances where the winds be very strong. Insert the microphone windscreen at the end of the left side of the microphone as shown below. 3.3 Powering On Press and hold the Center Button and the (+) Button at the same time for 1 second to power on.
EXPAND (highest) Mobile phone, Intercom, Music sharing by Bluetooth stereo music, (lowest) Bluetooth stereo music 3.7 Charging The charging LED beside the charging port turns red while charging, and turns to blue when the headset is fully charged. It takes about 2.5 hours to be completely charged. You can use the Sena Expand while it is charging. A lower priority function is always interrupted by a higher priority function.
EXPAND 3.8 Low Battery Warning When the battery is low, the blinking blue LED in stand-by mode turns to red and you will hear midtone triple beeps and a voice prompt, “Low battery”. 3.9 Checking the Battery Level You can check the battery level in two different ways when the headset is powering on. 3.9.1 LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100% 3 flashes = Medium, 30~70% 2 flashes = Low, 0~30% 3.9.
EXPAND 4. CONFIGURATION SETTING English 2. Insert a paper clip into the reset pin-hole and press the reset button for a second using light pressure. The Sena Expand will be switched off, and you have to turn the system back on and try again. However, this will not restore the headset to the factory default settings. You can set the configuration of the Sena Expand by the voice menu instructions as below. 1.
EXPAND The voice prompt for each menu item is as follows: (1) Phone pairing (6) Voice prompt (2) Multipoint pairing (7) Noise control (3) Phone selective pairing (8) Delete all pairings (4) Media selective pairing (9) Factory reset (5) Speed dial (10) Exit configuration Phone pairing Multipoint pairing Exit configuration Phone selective pairing Factory reset Media Selective pairing Delete all pairings Noise control Speed Dial Voice prompt 4.
EXPAND 4.4 Media Selective Pairing “Media selective pairing” N/A To go into media selective pairing mode, press the (+) Button or the (-) Button until you hear the voice prompt, “Media selective pairing”. Please refer to section 6.2 for more details on media selective pairing. If you press the (+) or (-) Button, you can exit from the media selective pairing mode. 4.5 Assigning Speed Dial Voice Prompt “Speed dial” Factory Default N/A Execute Press the Center Button 1.
EXPAND 4.6 Enabling/Disabling Voice Prompts Voice Prompt “Voice prompt” Factory Default Enable Enable / Disable Press the Center Button Note: If you use your Sena Expand with the Bluetooth Audio Pack for GoPro or Prism, you can enable or disable this feature only during Normal Audio Recording Mode. This feature is automatically disabled while in Ultra HD (UHD) Audio Mode. You can disable voice prompts by configuration setting, but the following voice prompts are always on.
EXPAND 4.9 Reset to Factory Default Setting Press Center Button N/A Phone Pairing None Press the Center Button Multipoint Pairing None Phone Selective Pairing None Media Selective Pairing None “Factory reset” Factory Default Execute To restore factory default settings on the Sena Expand, press the (+) Button or the (-) Button until you hear the voice prompt, “Factory reset”. Press the Center Button to confirm. The Sena Expand powers off with a voice prompt, “Headset reset, goodbye”.
EXPAND 5. PAIRING THE EXPAND WITH BLUETOOTH DEVICES Before using the Sena Expand headset with any Bluetooth device for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth stereo devices such as MP3 and with a Bluetooth adapter or transmitter such as Sena SR10 or SM10. This pairing operation is only required once for each Bluetooth device.
EXPAND 5.3 Bluetooth Stereo Device Pairing If the Bluetooth stereo device is integrated with a mobile phone such as a smartphone, you don’t need to pair the Sena Expand with it separately. When the Sena Expand is paired with the mobile phone, it is also paired as a stereo music device. If you have a stand alone Bluetooth stereo device, follow the pairing procedure separately. The procedure is the same as the procedure given in “4.1 Mobile Phone Pairing”. Note: 1.
EXPAND 1. To enter the voice configuration menu, press and hold the Center Button for 12 seconds until you hear the voice prompt, “Configuration menu”. 2. Press the (+) Button twice and you will hear the voice prompt, “Multipoint pairing”. 3. Turn on the SR10 and follow the SR10’s “Bluetooth Headset Pairing” procedure to complete the process. Please refer to the SR10 user's guide for details. 4. When the pairing is completed, you will hear the voice prompt, “Your headset is paired”. 5.
EXPAND If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the Sena Expand for A2DP stereo music only or for mobile phone handsfree only. This instruction is for advanced users who want to pair the Sena Expand to their smartphones with only one selective profile: A2DP stereo for music or HFP for phone call.
EXPAND 7. STEREO MUSIC You can listen to stereo music from your Bluetooth wireless audio device. The Bluetooth audio device must be paired with the Sena Expand by following the “Bluetooth Stereo Device Pairing” procedures described in chapter 5.3. The Sena Expand supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports AVRCP, you can use the Sena Expand to remotely control music playback.
EXPAND If you have a second mobile phone connected with the Sena Expand by multipoint connection, you can answer the incoming call to the second mobile phone by pressing the Center Button while you are on the line of the first mobile phone. In this case, the first call is on call waiting. 8.2 Speed Dialing You can quickly make a phone call by using the voice speed dial menu. 1.
EXPAND Note: Make sure that you should connect the mobile phone and the headset in order to use the speed dial function. Answer Press the Center Button End Press the Center Button for 2" Reject Press the Center Button for 2" Call Speed Dial Voice Command Use phone keypad Press the (+) Button for 3" Press the Center Button for 3" Mobile Phone Call Button Operations 22 9. INTERCOM 9.
EXPAND B D C Note: Pairing A & B 4. You can make other pairings between headsets A and C, and between headsets A and D by following the same procedure as above. A B A D C Pairing A & C B D For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the third intercom friend of headset A. 9.
EXPAND 9.3 Two-way Intercom 9.3.1 Start and End Two-way Intercom 1. You can start a one-on-one intercom conversation with any intercom friend by pressing the Center Button: Single pressing to intercom with the first intercom friend, double pressing for the second intercom friend, or triple pressing for the third intercom friend. 2. To terminate a one-on-one intercom conversation, single press the Center Button. This will end the intercom conversation.
EXPAND 9.3.3 Intercom and Two-way Radio As described in 5.4 of this user's guide, you can use a two-way radio and Sena Expand Bluetooth intercom simultaneously by using the Sena SR10, a Bluetooth Two-way Radio Adapter, along with the Sena Expand. Incoming audio from the two-way radio does not interrupt an intercom conversation but is heard in background. English 2.
EXPAND 1. You (A) need to be paired with two other friends (B & C) for three-way conference intercom. g First Friend (B) Second Friend (C) 2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with intercom friend (B). Or intercom friend (B) may start an intercom call with you (A). g rin i Pa First Friend (B) 26 g (A) rin rin i Pa i Pa 9.4 Three-way Intercom 9.4.
EXPAND (A) First Friend (B) Second Friend (C) 4. Now you (A) and two Sena Expand intercom friends (B & C) are having a three-way conference intercom. (A) First Friend (B) Second Friend (C) 9.4.2 End Three-way Intercom When you are a member of an active three-way conference intercom, you can completely terminate the conference intercom or just disconnect an intercom connection with one of your active intercom friends. 1.
EXPAND 9.4.3 T hree-way conference phone call with intercom participants You can have a three-way conference phone call by adding an intercom friend to the mobile phone conversation. While having a mobile phone call, make an intercom call to one of your intercom friends (B, C or D) by pressing the Center Button once, twice or three times to form a three-way conference call with the person on the mobile phone line.
EXPAND 1. Press and hold the Center Button for 1 second until you hear a beep to terminate four-way conference intercom. It terminates the intercom connections between you (A), and your intercom friends (B) and (C). 2. Press or press twice the Center Button to disconnect the intercom connection with one of the two intercom friends accordingly. However, when you disconnect the second friend (C) by pressing twice the Center Button, you will be disconnected with the third participant (D) as well.
EXPAND 10. MUSIC SHARING You can start sharing music with an intercom friend using Bluetooth stereo music during a twoway intercom conversation. When you terminate music sharing, you can go back to the intercom conversation. To start or terminate sharing music, press and hold the Center Button for 1 second during an intercom conversation until you hear a double beep and you and your intercom friend will listen to or terminate sharing music.
EXPAND g g (B) (A) n iri Pa Non-Sena Bluetooth headsets may initiate the Universal Intercom connection, activating the voice dialing or using the redialing operation. You may also disconnect the existing connection by ending a call operation function (refer to the users’ manual of the headsets for voice dialing, redialing, and ending a call). 1. You (A) need to be paired with non-Sena Bluetooth headset (B) and another Sena Expand (C) for the three-way conference intercom. Pa iri n 11.
EXPAND 2. Start an intercom conversation with non-Sena Bluetooth headset (B) in your intercom group. For example, you (A) may start an intercom conversation with non-Sena Bluetooth headset (B). The non-Sena Bluetooth headset (B) may also start an intercom call with you (A). (A) (B) (C) (A) 32 (A) (B) 3. The other Sena Expand (C) may join the intercom by making an intercom call to you (A). (B) 4.
EXPAND 3. The non-Sena Bluetooth headset (D) may join the conference intercom by making an intercom call to the Bluetooth Mic (C). 11.4.1 Four-way Universal Intercom Case 1 Two Sena Expands (A and C) and two non-Sena Bluetooth headsets (B and D). (A) (C) 1. You (A) may start an intercom conversation with the non-Sena Bluetooth headset (B). (D) (B) (A) 4. Now two Sena Expands (A & C) and two non-Sena Bluetooth headsets (B & D) are connected with the four-way Universal Intercom. (C) (D) (B) (A) 2.
EXPAND 11.4.2 Four-way Universal Intercom Case 2 Three Sena Expands (A, C and D) and one non-Sena Bluetooth headset (B). The procedure is the same as the case 1 described in section 11.4.1. (A) (B) 34 (C) (D) Note: The Universal Intercom affects both the phone call connection on a non-Sena and the multipoint connection on a Sena headset. - If the non-Sena headset does not support a multipoint connection then a phone call connection will be unavailable while using the Universal Intercom.
EXPAND The Sena Expand supports a firmware upgrade function. Please visit the Sena Bluetooth web site at www.sena.com to check the latest software downloads. 13. SENA BLUETOOTH CONNECTION CASE STUDIES English 12.
EXPAND Case 2 • Mobile phone calls • MP3 Player for stereo music streaming • Two other Sena Expand for three-way conference intercom Case 3 • Mobile phone calls and stereo music streaming • Sena SR10 for two-way radio and radar detector alarm • Sena Expand for two-way intercom Mobile Phone Mobile Phone Mobile Phone Pairing Mobile Phone Pairing Two-way radio Intercom Pairing Mobile Phone Pairing Wired Connection Tow-way radio Multipoint Pairing Intercom Pairing 36 Intercom Pairing SR10
EXPAND Type Basic Function Description MP3 Duration LED Power-on 1 sec Sollid blue Power-off Center Button & (+) Button 1 press Solid red Volume Adjustment (+) Button or (-) Button 1 press - Center Button 12 sec (+) Button 1 press Blue & red alternatively flashing Answer mobile phone call Center Button 1 press - End a call Center Button 2 sec - Reject an incoming call Center Button 2 sec - Voice command Center Button 3 sec - Phone pairing Mobile Phone Button Center B
EXPAND CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
EXPAND CE Declaration of Conformity Bluetooth License The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and trade names are those of their respective owners. The product is compliant with and adopts the Bluetooth® Specification 3.0 and has successfully passed all interoperability tests that are specified in the Bluetooth® specification.
EXPAND WEEE (Waste Electrical and Electronic Equipment) The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available.
EXPAND Product Use • Use of the product at a high volume for a long period of time may damage your eardrums or hearing ability. Keep the volume at a modest level to prevent damage. • Do not cause impact to the product or touch it with sharp tools as this may damage the product. • Do not use the product in high-temperatures or apply heat to the product as this may cause damage, explosion, or fire. • Keep product away from pets or small children. They may damage the product.
EXPAND • While using the product, you may sometimes experience a mild sting in your ears due to static electricity accumulated in your body. This is not a malfunction of the product. You can reduce the static electricity by wearing clothes made from natural materials. • Be careful when using the product in wet environments. If the product gets wet, dry it thoroughly before using it any further. Do not attempt to dry the product with an external heat source, such as a hair dryer.
EXPAND Limited Warranty Limited Warranty Sena Technologies, Inc. (“Sena”) guarantees the product quality based on the technical specification stated in the product manual, and data regarding product warranty. Here, product warranty extends to the product only. Sena will not be liable for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or flaws that occur due to problems in manufacture.
EXPAND 2. You must completely understand and accept all risks (including those occurring due to any careless behavior of yours or others) which may occur during the use of this product. 3. You are responsible for ensuring that your medical condition permits usage of the product and that you are in sufficient physical condition for using any device which can be used with it. In addition, you must ensure that the product does not limit your abilities and that you are able to use it safely. 4.
EXPAND Warranty Exclusions Use of this product may violate local or national laws. In addition, be aware once again that correct and safe use of the product is entirely your responsibility.
EXPAND • In the event the product is damaged because it has been left unattended or has undergone any other accident. • In the event the product is damaged because the user has used any parts or software which are not provided by the manufacturer. • In the event the product is damaged because the user has disassembled, repaired, or modified it in such way as is not explained in the product manual. • In the event the product is damaged by a third party.
1.2.3 www.sena.com User’s Guide for Firmware v2.1.