User Guide
EXPAND
16
5. PAIRING THE EXPAND WITH
BLUETOOTH DEVICES
Before using the Sena Expand headset with any
Bluetooth device for the rst time, you need to do
the pairing operation. It can be paired with Bluetooth
mobile phones, Bluetooth stereo devices such as
MP3 and with a Bluetooth adapter or transmitter
such as Sena SR10 or SM10. This pairing operation
is only required once for each Bluetooth device.
The headset will remain paired with the devices
and automatically connects to the paired devices
again when they are within range. You will hear a
high tone single beep and a voice prompt when the
headset connects to a paired device automatically:
“Phone connected” for a mobile phone, or “Media
connected” for a Bluetooth stereo device.
5.1 Mobile Phone Pairing
1. To enter the voice conguration menu, press and
hold the Center Button for 12 seconds until you
hear the voice prompt, “Conguration menu”.
2. By pressing the (+) Button, you will hear the voice
prompt, “Phone pairing”.
3. Search for a Bluetooth device on your mobile
phone. Select the Sena Expand in the list of
devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may
not ask for a PIN.
5. The mobile phone conrms that pairing has completed
and the Sena Expand is ready to use. You will hear the
voice prompt, “Your headset is paired”.
6. If the pairing process is not completed within three
minutes, the Sena Expand will return to stand-by
mode.
5.2 Multipoint Pairing
Typical Bluetooth headsets can connect with only
one HFP (Hands-Free Prole) device, but multipoint
pairing allows the headset to connect with two HFP
devices at the same time. So, when you already have
a mobile phone connected with the Sena Expand,
you can also pair and connect a second mobile
phone or other HFP device such as the Sena SR10,