User Guide
17
EXPAND
English
Bluetooth adapter.
1. To enter the voice conguration menu, press and
hold the Center Button for 12 seconds until you
hear the voice prompt, “Conguration menu”.
2. Press the (+) Button twice then you will hear the
voice prompt, “Multipoint pairing”.
3. If you want to pair a second mobile phone, search
for the Bluetooth device on your mobile phone,
and select the Sena Expand in the list of devices
detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may
not ask for the PIN.
5. The mobile phone conrms that pairing has
completed and the Sena Expand is ready to use.
You will hear the voice prompt, “Your headset is
paired”.
6. If you want to pair the Sena SR10, Bluetooth
adapter, please refer to the section “5.4 Pairing
with the Sena SR10, Bluetooth Two-way Radio
Adapter".
5.3 Bluetooth Stereo Device Pairing
If the Bluetooth stereo device is integrated with a
mobile phone such as a smartphone, you don’t need
to pair the Sena Expand with it separately. When the
Sena Expand is paired with the mobile phone, it is
also paired as a stereo music device.
If you have a stand alone Bluetooth stereo device,
follow the pairing procedure separately. The
procedure is the same as the procedure given in “4.1
Mobile Phone Pairing”.
Note:
1. If a Bluetooth connection between the headset and a
mobile phone is disconnected, press and hold the Center
Button for 3 seconds until you hear a high tone single beep
to recover the Bluetooth connection immediately.
2. If a Bluetooth connection between the headset and a media
player is disconnected, press and hold the Center Button
for 1 second to recover the Bluetooth connection and play.
5.4 Pairing with the Sena SR10 Bluetooth
Two-way Radio Adapter
The Sena SR10 is a Bluetooth two-way radio adapter
for group communication. If you pair the Sena
Expand with an SR10 by multipoint pairing, the Sena
Expand is able to have two HFP devices at the same
time: a mobile phone and the Sena SR10.