User Manual

5.2. Configuration

- IP address of User PC: 192.168.18.10

- HelloDevice Configuration

! IP address: 192.168.18.1.

! Host mode:

1320, LS100, PS100/200/400, SS100: TCP Server mode (Local port: 6000)

SS110/400/800: TCP mode, Listening port 6000

! Serial parameters: 9600, 8, N, 1, H/W flow control

- HelloDevice UniversalComm Configuration

! TCP Client

1) Run HelloDevice UniversalComm program by clicking the shortcut or menu.

2) Specify the Destination IP and Destination port. And then enable

the TCP Server/Client mode.

3) Press [Connect] button to create the TCP session between the HelloDevice

and the user PC.

! RS-232 connection

1) Run one more instance of the HelloDevice UniversalComm.

2) Configure the serial port setting of the PC to make it same as the one of the

HelloDevice connected to the PC by using [Change Setting].

3) Create RS232 connection between the PC and the HelloDevice by pressing

[Open] button.

HelloDevice

IP address

HelloDevice

Listenin

ort

HelloDevice

Serial

aramete