User Manual

6
UDP
[Bind] or [Stop Bind]
RS232
[Open] or [Close]
3.2 TCP Server mode setting
1) Enter the Listening TCP port number into the Server Port field, and enable the TCP
Server/Client check box.
2) Press [Listen] button, and then the TCP Server session is created.
3.3 TCP Client mode setting
1) Enter the IP address and TCP port number of the remote host to connect into the field
Destination IP and Destination Port, and then, enable the TCP Server/
Client check box.
2) Press [Connect] button, and then it will connect to the remote host specified as a TCP
client mode.