Owner manual

Sena Technologies, Inc
55
Status, RSSI. If the LinkQuality is close to 255 and RSSI is close to 0, the signal strength
is in good standing.
Example
+++
AT+BTRSSI,1
 OK
0,255,0,0
B.3.11. AT+MLIST?
Response
 CURRENT MODE:SINGLE CONNECTION MODE
 OK
Purpose
Display the current multiple connection mode and connected slave’s Bluetooth
addresses
Description
Display current mode (SINGLE CONNECTION MODE, MULTI-DROP MODE, NODE
SWITCHING MODE) and connected slaves’ Bluetooth addresses.
예제
AT+MLIST?
CURRENT MODE: MULTI-DROP MODE
TASK1 – 000195000001
TASK2 – DISCONNECT
TASK3 – DISCONNECT
TASK4 – 000195000004
TASK5– DISCONNECT
TASK6– DISCONNECT
TASK7– DISCONNECT
B.3.12. AT+BTMODE,n
Response
 OK
Purpose
Set operation mode
Parameters
n=0: MODE0 (Default)
n=1: MODE1
n=2: MODE2
n=3: MODE3
Description
When the operation status is ‘Pending’ currently, change the status to ‘Standby’ with
AT+BTCANCEL prior to this command.
To take effect, the ATZ must be executed or Power cycle of the unit.
Example
AT+BTMODE,2
 OK
ATZ
B.3.13. AT+MULTI,n
Response
(n=0)
 OK