User guide

ProBee-ZE20S-SExx User Guide Rev 1.8
55
INSTALL CODE: 1122334455667788 # Successfully changed
OK
5.4.3 ProBeeSESI Coordinator Configuration
Hardware configuration for the coordinator is as follows:
 Set the HOST switch to UART
 Connect a serial cable between a host computer and the coordinator
The AT commands for coordinator configuration is as follows:
#Screen of ProBeeSESI(coordinator)
AT+NODETYPE=1
OK
AT+PANID=7772
OK
ATZ
OK
Channel:14, PanID:7772 # Forming network successfully
5.4.4 ProBeeSEID End-device Configuration
Hardware configuration for the end-device is as follows:
 Set the HOST switch to UART
 Connect a serial cable between a host computer and the end-device
The AT commands for the ProBeeSEID end-device are as follows:
#Screen of ProBeeSEID(end-device)
AT+NODETYPE=3
OK
AT+PANID=7772
OK
ATZ
OK
Channel:14, PanID:7772
FAILED TO JOIN(AD) # Failed to join with security error(AD)
AT+LONGADDR # Get long address
000195AABBCC0001
OK