User guide

ProBee-ZE20S-SExx User Guide Rev 1.8
95
format of time is determined by ATU value.
Execute AT+PRSTARTTIME?<CR> AT+PRSTARTTIME=<UTC time>
Response
<UTC time><CR>
OK<CR>
OK<CR> or ERROR<CR>
Default 01-01-2000/00:00:00
Range 01-01-2000/00:00:00 - 02-07-2136/06:28:15
7.13.5 AT+MSID or AT+MID
Description
Get/Set Message ID. This value will be used in AT+MSDISPLAY and
AT+MSCANCEL.
Execute AT+MSID?<CR> AT+MSID=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR> or ERROR<CR>
Default 00000000
Range 00000000 – FFFFFFFF
7.13.6 AT+MSCTRL or AT+MCT
Description
Get/Set Message Control. This value will be used in AT+MSDISPLAY and
AT+MSCANCEL.
Execute AT+MSCTRL?<CR> AT+MSCTRL=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR> or ERROR<CR>
Default 00
Range 00 – FF
7.13.7 AT+MSSTARTTIME or AT+MST
Description
Get/Set Messaging Start Time. This value will be used in AT+MSDISPLAY. The
format of time is determined by ATU value.
Execute AT+MSSTARTTIME?<CR> AT+MSSTARTTIME=<UTC time>
Response
<UTC time><CR>
OK<CR>
OK<CR> or ERROR<CR>
Default 01-01-2000/00:00:00
Range 01-01-2000/00:00:00 - 02-07-2136/06:28:15
7.13.8 AT+MSDURATION or AT+MDU
Description Get/Set Duration in Minutes. This value will be used in AT+MSDISPLAY.
Execute AT+MSDURATION?<CR> AT+MSDURATION=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR> or ERROR<CR>