Manual

68
ProBee
-
ZE20S User Guide Rev.1.
10
Range 00000800 - 07FFF800
7.4.2 AT+PANID or AT+PI
Description
Get/Set the 16-bit PAN ID. If it is set to 0s at a coordinator, the coordinator will select a
random 16-bit hexadecimal number as PAN ID. If it is set to 0s at a router/end-device,
the router/end-device will try to join any existing network regardless of PAN ID.
Execute AT+PANID?<CR> AT+PANID=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR> or ERROR<CR>
Default 0000
Range 0000 – FFFF
7.4.3 AT+EPID or AT+EI
Description
Get/Set the 64-bit extended PAN ID. If the node is a coordinator and the EPID is set to
0s, it will create new extended PAN ID using its 64-bit IEEE address as extended PAN
ID. If the node is a router or end-device and the EPID is set to 0x, it will try to join any
existing network regardless of extended PAN ID.
Execute AT+EPID?<CR> AT+EPID=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR> or ERROR<CR>
Default 0000000000000000
Range 0000000000000000 - FFFFFFFFFFFFFFFF
7.4.4 AT+GROUPID or AT+GI
Description Get/Set the 16-bit Group ID. It is used for multicast data reception.
Execute AT+GROUPID?<CR> AT+GROUPID=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR> or ERROR<CR>
Default 0000
Range 0000 - FFFF
7.4.5 AT+POWER or AT+PW
Description Get/Set the TX power at which the RF module transmits conducted power.
Execute AT+POWER?<CR> AT+POWER=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR> or ERROR<CR>
Default 8
Range -43 - 8