Owner manual

Promi-ESD User Manual Connections 26
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Connection Module low signal
RST(Reset) : RST signal will be used for initialization of Promi-ESD. RST
should be on 0V status for at least 1 second for this.
Promi-ESD01
When TTL level of MICOM is 3.3V
MICOM
PROMI-ESD01
MICRO-VDD
MICOM -RXD
MICOM -CTS
MICOM -RTS
MICOM -RST
MICOM -DTR
MICOM -DSR
TXD
RXD
CTS
RTS
RST
DTR
DSR
MICOM -TXD
MICOM -GND
VDD
GND
MICOM -DCD Status
DC 3.3V
When TTL level of MICOM is 3.3V and not using hardware flow control.