Owner manual
Promi-ESD User Manual – Appendix A AT Commands
A-8
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Purpose Terminate a current executing task
Description This terminates a current executing task, such as Inquiry
scan and Page scan, then converts the operation status to
‘Standby’.
Reference AT+BTSCAN, ATD, AT+BTINQ?
13 AT+BTSCAN
Response OK
CONNECT 112233445566
Purpose Wait for inquiry and connection from other Bluetooth
devices
Description This allows the inquiry and connection from the other
Bluetooth devices. The operation status will be in
‘Pending’ after this command. When connection is made
and released, the operation status is back to ‘Pending’. To
convert the operation status to ‘Standby’ AT+BTCANCEL
must be used.
This has the same effect as AT+BTSCAN,3,0.
When connection is made with other Bluetooth device, SD
response will be ‘CONNECT’ with its BD address.
Reference ATD, AT+BTINQ?, AT+BTCANCEL
14 AT+BTSCAN,n,to
Response OK
CONNECT 112233445566
or
OK
ERROR
Purpose Wait for inquiry and connection from other Bluetooth
devices for a given duration
Parameters
n
=1: Allows Inquiry scan
n
=2: Allows Page scan
n
=3: Allows both of Inquiry scan and Page scan
to
= Time duration in seconds
Description For the given
to
, Promi-ESD is waiting for the inquiry and
connection from other Bluetooth devices. If the parameter