Owner manual
Promi-ESD User Manual – Appendix A AT Commands
A-9
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
of
to
is 0, it will wait forever.
When connection is made with other Bluetooth device, SD
response will be ‘CONNECT’ with its BD address. If there
is no connection made within this time duration, SD
response is ‘ERROR’ and the operation status becomes to
‘Standby’.
Reference ATD, AT+BTINQ?, AT+BTCANCEL
Example AT+BTSCAN,2,30
15 AT+BTSCAN112233445566,to
Response OK
CONNECT 112233445566
or
OK
ERROR
Purpose Wait for connection by the Bluetooth device with given BD
address
Parameters 112233445566=BD address
to
= time duration in seconds
Description For the given
to
, Promi-ESD is waiting for the connection
from the Bluetooth device with the given BD address. If
the parameter of
to
is 0, it will wait forever.
When connection is made with the Bluetooth device, SD
response will be ‘CONNECT’ with its BD address. If there
is no connection made within this time duration, SD
response is ‘ERROR’ and the operation status becomes to
‘Standby’.
Reference ATD, AT+BTINQ?, AT+BTCANCEL
Example AT+BTSCAN000B530011FF,30
16 ATD
Response OK
CONNECT 112233445566
or
OK
ERROR