User Guide User Manual

<ptp|multi|manual>

: To configure Routing table for Repeater Mode.

src: Bluetooth address of source device

dst: Bluetooth address of destination device

Response: src > dst

Ex.:

ROUTE

00:0B:53:12:03:A8 > 00:00:00:00:00:00

00:00:00:00:00:00 > 00:0B:53:12:03:A8

+OK

5.6 Commands for Repeater Mode

STATION <bdaddr>

: To configure Bluetooth address of station Promi-MSP.

In repeater mode Promi-MSP will try to connect to this device.

Ex.:

STATION 00:0B:53:00:00:01

+OK

REPEATER

: Display all of repeaters and Bluetooth devices connected currently.

Entry starting with R is repeater and one with P is Bluetooth device.

Response: R|station|repeater|repeater_name

P|msp|peer|peer_name

Ex.:

REPEATER

R|00:0B:53:00:00:01|00:0B:53:00:00:02|Promi-MSP_001002

P|00:0B:53:00:00:02|00:0B:53:00:00:10|PSDv3b-000010

+OK

5.7 Commands for Bluetooth Configuration

BTNAME <name>