User Guide User Manual

50
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
: BTNAME command audits or revises Promi-MSP™ Device Names
exposed to other Bluetooth devices.
If configured with default name (i.e., Promi-MSP), lower part of Bluetooth
address will be appended to the name.
Ex.:
BTNAME My Promi-MSP
+OK
BTNAME
+OK My Promi-MSP
PIN <pin-code>
: PIN command revises the Bluetooth PIN code. Max.: 16 bytes, ASCII
code only.
Ex.:
PIN 1234
+OK
SECU <low|high>
: SECU command revises the security level. Low obtains no security; High
obtains Enabling Security. Default SECU displays current security level.
Ex.:
SECU high
+OK
SECU
+OK high
PAIR <on|off>
: For Pairable mode enable/disable. In High security levels, when Paring
mode is set to off, only Bluetooth devices already sharing Link Key (see
LKEY command) can connect with Promi-MSP™ (non-pairable mode)
Ex.:
PAIR off
+OK
PAIR
+OK off
LKEY
: For auditing currently paired Bluetooth devices sharing Promi-MSP™ . Link
Key.
Response: local bdaddr|remote bdaddr