User Guide User Manual

56
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
CTRL <port no.>
: Control port default value is ‘2525’. CTRL command assigns new control
port number. Revised control port number is effective after Promi-MSP™
restart. Default CTRL displays current control port number value.
Ex.:
CTRL 3500
+OK
CANCEL
: To cancel current background operation.
Ex.:
CANCEL
+OK
RSET
: To restore to factory settings.
Ex.:
RSET
+OK
REBOOT
: To reboot Promi-MSP
Ex.:
REBOOT
+OK Rebooting…