User Guide User Manual

58
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-MSP responds with CONNECT.
AT+BTSCAN Scan mode can be specified.
1: Discoverable
2: Connectable
3: Discoverable and Connectable
at+btscan,3<cr>
AT+BTINQ? compatible with Promi-SD
AT+BTINFO? 〃
AT+BTNAME 〃
AT+BTKEY 〃
AT+UARTCONFIG 〃
AT+BTCANCEL 〃
AT+SETESC 〃
AT+BTLAST? 〃
AT+BTSEC 〃
AT+BTSD? 〃
AT+BTCSD 〃
AT+BTMODE Support only Mode 1 and Mode 2.
You can register Mode 1 devices by using
AT+BTREG.
S※ -registers are not supported.
Following commands are appended to Promi-MSP.
Command Description Example
AT+BTCHAN? Show currently selected device.
Promi-MSP only communicates with
selected device.
AT+BTCHAN?
000B53123456
OK
AT+BTCONN? Show all connected devices. AT+BTCONN?
000B53123456,PSDv3b-123456
000B53112233,PSDv3b-112233
OK
AT+BTREG Register Mode 1 device.
In Mode 1, all connections with registered
devices will be recovered after power-up.
AT+BTREG,000b53123456