User guide

2.1 Pre-installation Checklist
2.2 Configuring the Serial Server
2.3 Running the Serial/IP Redirector Setup Program
2.4 Selecting Serial/IP COM Ports
2.5 Configuring Serial/IP COM Ports in the Control Panel
2.6 Using the Serial/IP Configuration Wizard
2.7 Troubleshooting Installation Problems
2. Installing the Serial/IP Redirector
The Serial/IP Redirector software is installed on a PC by a setup program. Prior to the installation, you must
configure your serial server. After the installation, you configure the software to create Serial/IP COM ports and
configure them with the IP address (or DNS name) and TCP port numbers of serial servers. This chapter covers
these procedures in the order they should be performed.
In This Chapter
Pre-installation Checklist
What to check on the PC and the serial server before proceeding with the installation.
Configuring the Serial Server
Making the serial server ready to accept connections from the Serial/IP Redirector.
Running the Serial/IP Redirector Setup Program
Using the setup program to install the Serial/IP Redirector software on a PC.
Selecting Serial/IP COM Ports
Designating the Windows COM ports that will become Serial/IP COM ports.
Configuring Serial/IP COM Ports in the Control Panel
Entering the settings that make a Serial/IP COM port use a specific serial server.
Using the Serial/IP Configuration Wizard
Verifying the configuration settings by communicating with the serial server.
Troubleshooting Installation Problems
2. Installing the Serial/IP Redirector