User Manual

SMH10

Before using the SMH10 Bluetooth headset with any of Bluetooth

devicesforthersttime,youneedtodothepairingoperation.Itcan

be paired with Bluetooth mobile phones, Bluetooth stereo devices

suchasMP3,ormotorcyclespecicBluetoothGPS,andwithother

Sena Bluetooth headsets. This pairing operation is only required

once for each Bluetooth device. The headset will remain paired with

the devices and automatically connects to the paired devices again

when they are within range. You will hear a high tone single beep

and a voice prompt when the headset connects to the paired device

automatically: “Phone connected” to a mobile phone, “Media

connected” to a Bluetooth stereo device.

6.1 Mobile Phone Pairing

1. Turn on the SMH10 and press the Phone Button for 5 seconds until

the LED ashes red and blue alternately and you hear multiple

beeps. You will hear a voice prompt saying “Phone pairing”.

2. Search for Bluetooth devices on your mobile phone. Select the

Sena SMH10 in the list of the devices detected on the mobile

phone.

6. PAIRING THE SMH10 WITH BLUETOOTH DEVICES

3. Enter 0000 for the PIN. Some mobile phones may not ask for the

PIN.

4.The mobile phone conrms that pairing has completed and the

SMH10 is ready to use. You will hear a voice prompt from the

SMH10 saying “Your headset is paired”.

5. If the pairing process is not completed within three minutes, the

SMH10 will return to stand-by mode.

6.2 Multipoint Pairing

Typical Bluetooth headsets can connect with only one HFP (Hands-

Free Prole) device, but multipoint pairing allows the headset to

connect with two HFP devices at the same time. So, when you already

have a mobile phone connected with the SMH10, you can also pair

and connect a second mobile phone or other HFP devices such as

GPS or Sena SR10, Bluetooth adapter.

1. To pair the second mobile phone, press the Jog Dial for 5 seconds

againuntiltheredLEDisrapidlyashingand you hear multiple

beeps.

2. Within 2 seconds, tap the Phone Button again, then the LED turns

toblueashingandthebeepsturntohightonedoublebeeps.You

will hear a voice prompt saying “Multipoint pairing”.

3. Search for Bluetooth devices on your mobile phone. Select the

Sena SMH10 in the list of the devices detected on the mobile

phone.