User Manual

SMH10

English

7. PAIRING WITH SELECTIVE PROFILE:

A2DP STEREO OR HANDSFREE

If you have a MP3 stereo music phone such as a smartphone,

sometimes you may need to selectively use the SMH10 for

A2DP stereo music only or for mobile phone handsfree only. This

instruction is for advanced users who want to pair the SMH10 to their

smartphonesonlywithoneselectiveprole:A2DPstereoformusic

or HFP for phone call.

If you have previously paired a mobile phone to the SMH10, you

must clear the previous paring list on both devices; the mobile phone

and SMH10. To clear the pairing list on SMH10, please do a factory

reset or follow the pairing list clearing procedure described in this

manual. To clear the pairing list on the mobile phone, please refer to

the mobile phone manual. For most smartphones, delete the Sena

SMH10 from the list of Bluetooth devices in setting menu.

7.1 A2DP Stereo Music Only

1. Turn on the headset and press the Phone Button for 5 seconds

until the LED ashes red and blue alternately and you hear

multiple beeps.

2. Within 2 seconds, tap the Jog Dial again, then the LED turns to

redashingandthebeepsturntodouble mid-tone beeps. You

will hear a voice prompt saying “Media selective pairing”.

3. Search for Bluetooth devices on your smartphone. Select the

Sena SMH10 in the list of devices detected on your phone.

4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.

7.2 HFP for Phone Call Only

1. Turn on the headset and press the Phone Button for 5 seconds

until the LED ashes red and blue alternately and you hear

multiple beeps.

2. Within 2 seconds, tap the Phone Button again, then the LED turns

toblueashingand the beepsturn tomultiplemid-tonebeeps.

You will hear a voice prompt saying “Phone selective pairing”.

3. Search for Bluetooth devices on your smartphone. Select the

Sena SMH10 in the list of devices detected on your phone.

4. Enter 0000 for the PIN. Some smart phones may not ask for PIN.