User Manual

SMH10

• Tap the Phone Button in stand-by mode to activate the voice

dialing of your mobile phone. For this, the voice dialing feature

must be available on the mobile phone. Refer to your mobile

phone manual for further instruction.

Note:

1. If you are using multipoint mobile phone connection and you have an

incoming call from the second phone during the call of the ﬁrst phone,

then you may still receive the call from second phone. In this case, the

call from the ﬁrst phone is on waiting mode. If you end a call, then it will

automatically guide you to the ﬁrst phone call.

2. If you are using multipoint connection of mobile phone and GPS, you may

not be able to listen to the GPS voice instruction during the phone call.

12.2 Speed Dialing

You can quickly make a phone call by using the voice speed dial

menu.

1. To enter into the voice speed dial menu, double tap the Phone

Button and you will hear a mid-tone single beep and a voice

prompt saying “Speed dial”.

2. Rotate the Jog Dial clockwise or counter-clockwise to navigate

between the menus. You will hear voice prompts for each menu

items.

3. Tap the Phone Button or the Jog Dial to select a voice menu among

thefollowings:

(1) Last number redial (4) Speed dial 3

(2) Speed dial 1 (5) Cancel

(3) Speed dial 2

4. After selecting the last number redial menu, you will hear a voice

prompt saying “Last number redial”. Then, to redial the last phone

call number, tap the Phone Button or the Jog Dial.

5. To call one of the speed dials, rotate the Jog Dial clockwise or

counter-clockwise to navigate between the menus until you hear a

voice prompt saying “Speed dial (#)”. Then, tap the Phone Button

or the Jog Dial.

6. If you want to exit the speed dial immediately, rotate the Jog

Dial until you hear a voice prompt saying “Cancel”, and tap the

Phone Button or the Jog Dial. If any button is not pressed within 15

seconds, the SMH10 will exit the voice speed dial menu and goes

back to stand-by mode.

Note:

Make sure that you should connect the mobile phone and the headset in

order to use the speed dial function.