User Manual

SMH10
8
2.Pleaseadjustthedirectionofthemicrophonesothatthenside
of the microphone is facing outward; away from your lips. You can
easilyrecognizeitbytouchingthenwithyourngers.
fin
The microphone cap helps you to cut down incoming microphone
wind noise by protecting the microphone from the wind and provide
clearer voice audio sound. Put the microphone cap on the side of
themicrophonethathasthenonit.
When installing the boom microphone included in the “Universal
Microphone Kit”, place the velcro end of the boom microphone
between the internal helmet cheek pad and the internal wall of the
helmet shell. The boom microphone should be mounted so it is
facing close to your mouth when you wear the helmet. You can use
the enclosed velcro pad and holder for the boom microphone to
ensure secure placement.
In the case of the wired microphone also included in the “Universal
Microphone Kit”, attach the enclosed velcro pad for wired
microphone to the inside of the chin guard for full-face helmets.
Place the wired microphone on the velcro pad and connect it to the
connector of the clamp unit.