Operation Manual

SMH10

3. When you have an incoming phone call during an intercom conversation, you

can choose whether to pick up the call or not after you hear the ring tone.

4. When you have an incoming intercom call during a mobile phone conversation,

you will hear high tone 4 beeps. You have to hang up the mobile phone to make

an intercom connection.

•

3-Way Conference Intercom

You (A) could have a 3-way conference intercom with 2 other SMH10 friends (B & C)

by establishing two intercom connections at the same time. While a 3-way conference

intercom is in progress, mobile phone connection of all three participants would be

temporarily disconnected, but as soon as the conference intercom terminates or one

of the participants leaves the intercom, all mobile phones would be automatically

1. Press and hold the Phone Button for 8 seconds until the red LED is rapidly

flashing. When you do this, after first 5 seconds you press the button, you will see

the headset enters into the Mobile Phone Pairing sequence, but you have to keep

pressing the button for another 3 seconds until the red LED flashes rapidly.

2. To enable, tap the Phone Button, then the LED shows solid blue for 2 seconds

and you will hear double beeps.

3. To disable, tap the Jog Dial, then the LED shows solid red for 2 seconds and

you will hear a single beep.

• Intercom Conversation

1. You can start an intercom conversation with any of Intercom Friends by tapping the

Jog Dial: single tapping to intercom with the First Intercom Friend, double tapping

with the Second Intercom Friend, and triple tapping with the Third Intercom Friend.

2. To terminate an intercom conversation, single tap the Jog Dial. Any intercom

connection with any Intercom Friend will be terminated by a single tapping.

A double or triple tapping will do nothing in this case.

Terminate

Intercom

Friend

Intercom

Friend

Intercom

Friend