Operation Manual

SMH10
15
intercom completely. It terminates both of the two active intercom connections: one with
(B) and one with (C).
2. By single or double tapping the Jog Dial, you can terminate the intercom connection
with one of the two connected Intercom Friends accordingly. For example, by single
tapping the Jog Dial, you can just terminate the intercom connection with your First
Intercom Friend, (B). However, you still have the intercom connection with your Second
Intercom Friend (C).
• Enabling/Disabling Voice Activated Intercom (Factory Default: Disabled)
If this feature is enabled, you can initiate an intercom conversation with the last
connected Intercom Friend by speaking any word loudly enough. The most
effortless way to trigger intercom VOX is to blow into the microphone as if blowing
dust off the microphone. If you start an intercom conversation by VOX, the intercom
terminates automatically when you and your Intercom Friend remain silent for
20 seconds. However, if you manually start an intercom conversation by tapping
the Jog Dial, you have to terminate the intercom conversation manually by tapping
the Jog Dial again.
If this feature is disabled, the only way to initiate and terminate an intercom
conversation is to tap the Jog Dial.
1. Press and hold the Jog Dial for 8 seconds until the red LED turns on solidly.
When you do this, after first 5 seconds you press the Jog Dial, you will see
the headset enters into the Intercom Pairing sequence, but you have to keep
pressing the Jog Dial for another 3 seconds until the LED turns to solid red.
2. To enable, tap the Jog Dial, then the blue LED flashes for 2 seconds and
you will hear double beeps.
3. To disable, tap the Phone button, then the red LED flashes for 2 seconds
and you will hear a single beep.
However, even when this feature is enabled, if you terminate intercom conversation
manually by tapping the Jog Dial, you cannot start intercom by voice temporarily.
In this case, you have to tap the Jog Dial to restart the intercom. This is to prevent
repeated unintentional intercom connections by strong wind noise. If you tap the Jog
Dial to start intercom conversation, it is not terminated by 20 seconds of silence. After
turning SMH10 off and on, you can start intercom by voice again.
Tip:
The Jog Dial is for any kind of Intercom related function, and the Phone Button is for any functions of
mobile phone. With this reason, as far as intercom function is concerned, the Jog Dial is used for a
positive manner of action such as enabling, and the Phone Button is for a negative manner of action
such as disabling. Vice versa for the mobile phone functions.