Operation Manual

SMH10
8
PAIRING THE SMH10 WITH BLUETOOTH DEVICES
Before using the SMH10 Bluetooth headset with any of Bluetooth devices for the first
time, you need to do the pairing operation. It can be paired with Bluetooth mobile
phones, Bluetooth audio devices such as MP3 or GPS, and with other SMH10
Bluetooth headsets. This pairing operation is only required once for each Bluetooth
device, and the headset will remain paired with the devices and automatically connects
to the paired devices again when they are within range.
• Mobile Phone Pairing
1. Turn on the headset and press the Phone Button for 5 seconds until the LED
flashes red and blue alternately and you hear multiple beeps.
2. Search for Bluetooth devices on your mobile phone. The headset will be listed
on your mobile phone as SMH10.
3. Enter 0000 for the PIN
4. The headset can be paired as Handsfree or Headset. Handsfree profile is normally
recommended for most mobile phones. If it is paired as Headset, the buttons of
the SMH10 may not work properly.
• Low Battery Warning
When the battery is low, the blinking blue LED in stand-by mode turns to red
and you will hear mid-tone triple beeps.