Specifications

English
SMH10
9
• Bluetooth MP3 Player Pairing
1. The procedure is the same with the procedure of “Mobile Phone Pairing”, except
the SMH10 must be paired as Stereo Headset.
2. If you use a Bluetooth mobile phone and a Bluetooth audio device at the same
time, please make sure to pair as Handsfree or as Headset with the mobile phone
and to pair as Stereo Headset with the Bluetooth audio device.
• Bluetooth GPS Navigation Pairing
1. You can listen to Bluetooth voice instructions from a Bluetooth GPS navigation.
2. The paring procedure is the same with the procedure of “Mobile Phone Pairing”,
except the SMH10 could be paired as either Headset or Stereo Headset depending
on the Bluetooth GPS navigation.
3. Please refer to the manual of the Bluetooth GPS navigation for details.
PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE
If you have a MP3 stereo music phone such as a smartphone, sometimes you may
need to selectively use the SMH10 for A2DP stereo music only or for mobile phone
hands-free only. This instruction is for advanced users who want to pair the SMH10
to their smartphones only with one selective profile: A2DP Stereo for music or HFP
for phone call.
If it is not the first time to do paring with the smartphone, you have to clear the
previous paring list on both devices; the smartphone and SMH10. To clear pairing
list on SMH10, please do factory reset described on the page 16. To clear pairing
list on the smartphone, please refer to the smartphone manual.
• A2DP Stereo Music Only
1. Turn on the headset and press the Phone Button for 5 seconds until the LED
flashes red and blue alternately and you hear multiple beeps.
2. Within 2 seconds, tap the Jog Dial again, then the LED turns to red flashing and
the beeps turn to double mid-tone beeps.