User Manual

SMH10

Thevoicepromptforeachmenuitemisasbelow:

(1) Speed dial (5) Sidetone

(2) VOX phone (6) Noise control

(3) VOX intercom (7) Delete all pairings

(4) Voice prompt (8) Exit conguration

Exit configuration

Delete all pairings

Noise control

VOX phone

VOX intercom

Voice prompt

Speed dial

Sidetone

9.1 Assigning Speed Dial

Voice Prompt

“Speed dial”

Factory Default N/A

Execute Tap the Phone Button

1. To assign a phone number as a speed dial, rotate the Jog Dial until

you hear a voice prompt saying “Speed dial”.

2. Tap the Phone Button, and you will hear a voice prompt saying

“Speed dial one” and “Phone connected”.

3. Rotate the Jog Dial to select one of three speed dial numbers and

you hear a voice prompt saying “Speed dial (#)”.

4. Call a phone number you want to assign and you will hear a

voice prompt saying “Save speed dial (#)”. The phone number is

automatically assigned to the selected speed dial number. Then

the phone call will hang up before being connected.

5. To exit the menu, rotate the Jog Dial clockwise or counter clockwise

until you hear a voice prompt saying “Cancel”, and tap the Phone

Button to conrm. You will then hear a voice prompt saying

“Cancel”. If any button is not pressed within 1 minute, the SMH10

willexitthecongurationmenuandgobacktostand-bymode.

Note:

1. After assigning a phone number to one of three speed dials, you can

continually assign another phone number to the rest of two speed dials.

2. You can assign phone numbers to speed dials in your PC. Please visit the

Sena Bluetooth web site at www.sena.com for more information.