User Manual

SMH10
34
cannot use multipoint connection devices such as GPS, while a
non-Sena headset is turned on.
4. Even though you disconnect the non-Sena headset as a Universal
Intercom, it will not automatically restore the multipoint connection.
To restore the multipoint connection, you should turn off the
non-Sena headset rst, then try to connect to multipoint device
manually from the device screen or simply reboot the device so
that it automatically connects to the Sena headset.
17.1 Universal Intercom Pairing
The SMH10 can be paired with non-Sena Bluetooth headsets for
Bluetooth intercom conversation. You can pair the SMH10 with only
one non-Sena Bluetooth headset; if you pair with a different non-Sena
Bluetooth headset, the previous pairing list will be removed.
1. Turn on the SMH10 and a non-Sena Bluetooth headset which you
want to pair with.
2. Press and hold the Jog Dial on the SMH10 for 8 seconds until
theblueLEDashesrapidly.Youwillhearavoicepromptsaying
“Universal intercom pairing”.
3. Perform the operation required for handsfree pairing on the non-
Sena Bluetooth headset (refer to the users’ manual of the headsets
you want to use). The SMH10 will automatically perform pairing
with non-Sena Bluetooth headsets in pairing mode.
17.2 Two-way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as
you would between other Sena headsets. You may single tap the Jog
Dialtobeginanintercomconversationwiththerstintercomfriend,
double tap with the second intercom friend, and triple tap with the
third intercom friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom
connection, activating the voice dialing or using the redialing
operation. You may also disconnect the existing connection by ending
a call operation function (refer to the users’ manual of the headsets
for voice dialing, redialing, and ending a call).
17.3 Three-way Universal Intercom
You may make a three-way Universal Intercom connection with
two SMH10s and one non-Sena Bluetooth headset. If the intercom
connection is made, all headsets connected cannot use the mobile
phone call function since the connection between the headset and
the phone is disconnected temporarily. If you disconnect the intercom
call, the mobile phone connection is made again automatically so that
you can use a mobile phone call function. During the intercom call,
you cannot pick up the incoming phone call since it is disconnected,
however, you can pick it up if you disconnect the intercom call.