User Manual

SMH10
37
English
4. Now two SMH10 headsets (A & C) and two non-Sena Bluetooth
headsets (B & D) are connected with the four-way Universal Intercom.
(B)
(D)
(A)
(C)
You may disconnect a four-way Universal Intercom using the same
way as you do in a normal four-way intercom. Please refer to section,
15.2 “End Four-way Intercom”.
17.4.2 Four-way Universal Intercom Case 2
Three SMH10 headsets (A, C and D) and one non-Sena Bluetooth
headset (B). The procedure is the same as the case 1 described in
section 17.4.1.
(B)
(D)
(A)
(C)
You can have a three-way conference phone call by adding an
intercom friend to the mobile phone conversation. While having a
mobile phone call, make an intercom call to one of the intercom
friends by tapping the Jog Dial to form a three-way conference call
with the person on the mobile phone line. To disconnect the intercom
rst and go back to your private mobile phone call, terminate the
intercom by tapping the Jog Dial. To end the mobile phone call
rstandmaintaintheintercomconversation,presstheJogDialfor
2 seconds, or tap the phone button, or wait for the person on the
mobile phone line to end the call.
Start Tap Jog Dial while having a mobile phone call
Endintercomrst Tap Jog Dial
Endphonecallrst
Press Jog Dial for 2”
or
Tap Phone Button
or
Wait for the called person to end the call
Start & End Three-way Conference Phone Call
18. THREE-WAY CONFERENCE PHONE CALL
WITH INTERCOM PARTICIPANT