User Manual
SMH10
39
English
22. FAULT RESET
When the SMH10 is not working properly or is in faulty status for any
reason, you may reset by pushing the pin-hole reset button at the
back of the headset main unit. Insert a paper clip into the reset pin-
hole and press the reset button for a second with light pressure. The
SMH10 will be switched off, and you have to turn the system back
on and try again. However, this will not restore the headset to factory
default settings.
23. FIRMWARE UPGRADE
TheSMH10supportsrmwareupgradefunction.PleasevisitSena
Bluetooth web site at www.sena.com to check the latest software
downloads.