User Manual

SMH10R

You can easily adjust the volume by tapping the (+) Button or

the (-) Button. You will hear a beep when the volume reaches

maximum or minimum level. The volume is set and maintained

independently at different levels for each audio source even when

you turn the headset off and on. For example, once you set the

volume for mobile phone handsfree, it will not change even if you

adjust the volume when you hear Bluetooth MP3 music. So you

can always maintain the preferred optimum volume level for each

audio source.

You can set the conguration of the SMH10R by the voice menu

instructions as below.

1. To enter the voice conguration menu, press and hold the

Center Button for 10 seconds until the LED shows solid blue

and you hear high tone double beeps. You will also hear the

voice prompt, “Conguration menu”.

2. Tap the (+) Button or (-) Button to navigate between the menus.

You will hear voice prompts for each menu item as below.

3. You can enable / disable a feature or execute a command by

tapping the Center Button.

4. If you want to exit conguration immediately, tap the (+)

Button or (-) Button until you hear the voice prompt, “Exit

conguration”, then tap the Center Button.

5. VOLUME ADJUSTMENT

6. SMH10R CONFIGURATION SETTING