User Manual

SMH10R
12
the (-) Button until you hear the voice prompt, “Phone selective
pairing”. Please refer to section 8 for more details on phone
selective pairing. If you tap the (+) or (-) Button, you can exit from
the phone selective pairing mode.
6.4 Media Selective Pairing
Voice Prompt
“Media selective pairing”
Factory Default N/A
To go into media selective pairing mode, tap the (+) Button or
the (-) Button until you hear the voice prompt, “Media selective
pairing”. Please refer to section 8 for more details on media
selective pairing. If you tap the (+) or (-) Button, you can exit from
the media selective pairing mode.
6.5 Enabling/Disabling Voice Activated Phone Answering
Voice Prompt
“VOX phone”
Factory Default Enable
Enable / Disable Tap the Center Button
Tap the (+) Button or the (-) Button until you hear the voice prompt,
“VOX phone”. If this feature is enabled, you can answer incoming
calls by simply saying a word loudly enough, unless you are
connected to intercom. For example, when you hear a series of
beeps for an incoming call, you can answer the phone by saying
“Hello” or any other word loudly. However, the phone VOX feature
does not work if you are connected to intercom. This is enabled
from the factory but you can disable it. If this mode is disabled,
you have to tap the Center Button to answer an incoming call.
6.6 Enabling/Disabling Voice Activated Intercom
Voice Prompt
“VOX intercom”
Factory Default Disable
Enable / Disable Tap the Center Button
Tap the (+) Button or the (-) Button until you hear the voice prompt,
“VOX intercom”. If this feature is enabled, you can initiate an
intercom conversation with the last connected intercom friend
by speaking any word loudly enough. If you start an intercom
conversation by VOX, the intercom terminates automatically when
you and your intercom friend remain silent for 20 seconds.
6.7 Setting Intercom VOX Sensitivity
Voice Prompt
“VOX sensitivity”
Factory Default 3
Level Adjustment Tap the (+) or (-) Button (1 ~ 5)
Apply Tap the Center Button