User Manual

English

SMH10R

4. Attach the main unit to the velcro pad of your helmet.

5. Place the helmet speakers with the velcro pads, centered to

your ear, in the ear pockets of the helmet. If the helmet has

deep ear pockets, you can use the speaker pads to place the

speakers closer to your ears. Attach the speaker connector to

the 4 pin connector of the main unit cable.

6. There are two types of microphone that can be installed in your

helmet. In the case of the attachable boom microphone, place

the velcro end of the boom microphone between the internal

helmet cheek pad and the internal wall of the helmet shell and

attach the microphone connector to the 2 pin connector of the

main unit cable. The boom microphone should be mounted so

it is positioned close to your mouth when you are wearing the

helmet.

In the case of the wired microphone, attach the velcro pad for

the wired microphone to the inside of the chin guard for full-

face helmets. Place the wired microphone on the velcro pad and

attach the microphone connector to the 2 pin connector of the

main unit cable.