User Manual

SMH10R

7. Attach the velcro pads to the battery pack in the same manner

as the main unit and place the battery on the back side of your

helmet. Attach the battery connector to the 2 pin connector of

the main unit cable.

4.1 Powering On

Press the Center Button and the (+) Button at the same time for

1 second to power on. The blue LED turns on and you will hear

ascending beeps and “Hello”.

4.2 Powering Off

Tap the Center Button and the (+) Button simultaneously (you don’t

need to press and hold in order for the system to power off). The

red LED turns on for about 2 seconds until it turns off completely

and you will hear “Goodbye” and descending beeps.

4.3 Charging

The charging LED beside the charging port turns red while

charging, and turns to blue when the headset is fully charged. It

takes about 2.5 hours to be completely charged. You can use the

SMH10R while it is charging. This is especially helpful when you

use a cigarette charger for a long road trip.

4. POWERING ON/OFF AND CHARGING