Operation Manual

English

SMH5

You can check the battery level in two different ways when the

headset is powering on.

5.1 LED Indicator

When the headset is powering on, the red LED flashes rapidly

indicating the battery level .

4 flashes = High, 70~100%

3 flashes = Medium, 30~70%

2 flashes = Low, 0~30%

5.2 Voice Prompt Indicator

When you power on the headset, keep pressing the Jog Dial and

Phone Button simultaneously for about 3 seconds until you hear

three high tone beeps. Then you will hear a voice prompt indicating

the battery level. However, if you release the buttons as soon as the

headset turns on, you will not hear the voice prompt for the battery

level.

5. CHECKING THE BATTERY LEVEL

Before using the SMH5 Bluetooth headset with any of Bluetooth

devices for the first time, you need to do the pairing operation. It can

be paired with Bluetooth mobile phones, Bluetooth stereo devices

such as MP3, or motorcycle specific Bluetooth GPS, and with other

Sena Bluetooth headsets. This pairing operation is only required once

for each Bluetooth device, and the headset will remain paired with

the devices and automatically connects to the paired devices again

when they are within range. You will hear a high tone single beep

and a voice prompt when the headset connects to the paired device

automatically: “Phone connected” to a mobile phone, “Media

connected” to a Bluetooth stereo device.

6.1 Mobile Phone Pairing

1. Turn on the SMH5 and press the Phone Button for 5 seconds until

the LED flashes red and blue alternately and you hear multiple

beeps. You will hear a voice prompt saying “Phone pairing”.

2. Search for Bluetooth devices on your mobile phone. Select the

Sena SMH5 in the list of the devices detected on the mobile phone.

3. Enter 0000 for the PIN. Some mobile phones may not ask for the

6. PAIRING THE SMH5 WITH BLUETOOTH

DEVICES

*please contact Sena regarding locally approved agencies Sena accepts.