Operation Manual

English
SMH5
23
MAINTENANCE AND CARE DISPOSAL
The Product should be treated with care and the following suggestions
will help you protect your warranty coverage.
1. Do not use or store the device in dusty, dirty areas. Its moving parts
and electronic components can be damaged.
2. Do not store the device in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and wrap or melt
certain plastics.
3. Do not store the device in cold areas. When the device returns to
its normal temperature, moisture can form inside the device and
damage electronic circuit boards.
4. Do not attempt to open the product.
5. Do not drop or knock the device. Rough handling can break internal
circuit boards and fine mechanics.
6. Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean the device.
7. Do not paint the device. Paint can clog the moving parts and
prevent proper operation.
These suggestions apply equally to the headset main unit, clamp
unit, or power charger.
The crossed-out wheel bin symbol on the product,
literature, or packaging reminds you that all electrical
and electronic products, batteries, and accumulators
must be taken to separate collection at the end of their
working life. This requirement applies to the European
Union and other locations where separate collection
systems are available. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please do not
dispose of these products as unsorted municipal waste, but hand it
in at an official collection point for recycling.