SMH5 FM Bluetooth® Headset & Intercom with built-in FM tuner for Scooters and Motorcycles www.sena.
SMH5-FM © 1998-2015 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc. reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. PRISM™, 20S™, 3S™, SMH10™, SMH10R™, SMH5™, SMH5-FM™, SMH3™, SPH10™, EXPAND™, SPH10H™, SPH10H-FM™, SPH10S™, SR10™, SR10i™, SM10™, EXPAND™, Bluetooth Pack for GoPro® are trademarks of Sena Technologies, Inc.
SMH5-FM 1. INTRODUCTION.....................................................................................5 2. PACKAGE CONTENTS..........................................................................6 English CONTENTS 8. PAIRING WITH OTHER SMH5-FM HEADSETS FOR INTERCOM CONVERSATION..................................................................................16 3. INSTALLING THE SMH5-FM ON YOUR HELMET................................7 9.
SMH5-FM 11.10 Function Priority................................................................................ 28 11.11 Music Sharing................................................................................... 28 11.12 Reset to Factory Default Settings..................................................... 29 11.13 Fault Reset........................................................................................ 29 12. UNIVERSAL INTERCOM...............................................................
SMH5-FM Thank you for choosing the Sena SMH5-FM, Bluetooth Stereo Headset and Intercom for scooters and motorcycles. With the SMH5FM, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigation by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other riders. The SMH5-FM is compliant with the Bluetooth Specification 3.
SMH5-FM 2.
SMH5-FM - Full-face Helmet Kit English 3. INSTALLING THE SMH5-FM ON YOUR HELMET ∙ Wired Microphone ∙ Velcro Pads for Wired Microphone 1. Loosen the two screws on the back plate of the clamp using the enclosed Allen Wrench. Insert the back plate of the clamp unit between the internal padding and external shell of the helmet, and tighten the two screws.
SMH5-FM 2. Attach the headset main unit to the clamp. Insert the main unit in the clamp until you feel the click that signals a secure attachment. 3. If you have any problem mounting the clamp unit on the helmet for any reason, you may use the glued surface mounting plate which can be attached to the external surface of the helmet. ocate a proper surface on the helmet to attach the unit, clean •L the helmet surface location with a moistened towel, and allow to dry thoroughly.
SMH5-FM 6. When you use the boom microphone included in the “Basic Kit”, please make sure that the fin side of the microphone is facing outward; away from your lips. You can easily recognize it by touching the fin with your fingers. fin In the case of the wired microphone included in the “Full-face Helmet Kit”, attach the enclosed velcro pad for wired microphone to the inside of the chin guard for full-face helmets.
SMH5-FM Note: Insert the speaker cable connector into the main unit and push the connector cover down to lock the connector in place. 4. POWERING ON/OFF AND CHARGING To power on and off the headset, you don’t need to press and hold any button for several seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get quick on-and-off convenience. 4.1 Powering On Press the Jog Dial and the Phone Button at the same time for about 1 second to power on.
SMH5-FM 5. CHECKING THE BATTERY LEVEL English •T he USB Power Cable is also used for firmware upgrade of the SMH5-FM. ou can use any of the standard Micro-USB cables which is •Y mostly adopted by smartphones and general Bluetooth headsets manufacturers. he Charging LED beside the charging port turns on red while •T charging, and turns to blue when the headset is fully charged. It takes about 2.5 hours to be fully charged. ou can use the SMH5-FM while charging.
SMH5-FM 6. PAIRING THE SMH5-FM WITH BLUETOOTH DEVICES Before using the SMH5-FM Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth stereo devices such as MP3, or motorcycle specific Bluetooth GPS, and with other Sena Bluetooth headsets.
SMH5-FM 6.2 Bluetooth Stereo Device Pairing 1. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the SMH5-FM with it separately. When the SMH5-FM is paired with the mobile phone, it is also paired as a stereo music device. 2. If you have a stand alone Bluetooth stereo device, follow the pairing procedure separately. The procedure is the same as the procedure of “6.1 Mobile phone pairing”. Note: 1.
SMH5-FM 5. T he GPS confirms that pairing has completed and the SMH5-FM is ready to use. You will hear a voice prompt from the SMH5-FM saying “Your headset is paired”. 6. If the pairing process is not completed within three minutes, the SMH5-FM will return to stand-by mode. The pairing diagram for multipoint GPS pairing is shown in the figure below. 6.3.
SMH5-FM If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SMH5-FM for A2DP stereo music only or for mobile phone handsfree only. This instruction is for advanced users who want to pair the SMH5-FM to their smartphones only with one selective profile: A2DP for stereo music or HFP for phone call. If you have previously paired a mobile phone to the SMH5-FM, you must clear the previous paring list on both devices; the mobile phone and SMH5-FM.
SMH5-FM A 8. PAIRING WITH OTHER SMH5-FM HEADSETS FOR INTERCOM CONVERSATION The SMH5-FM can be paired with up to three other headsets for Bluetooth Intercom conversation. 1. Turn on the two SMH5-FM headsets (A and B) that you would like to pair with each other. 2. Press and hold the Jog Dial of the headset A and B for 5 seconds until red LEDs of the both units start to flash rapidly. You will hear a voice prompt saying “Intercom pairing”. 3.
SMH5-FM Note: For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the third intercom friend of headset 9. PAIRING WITH OTHER SENA HEADSET MODELS FOR INTERCOM CONVERSATION English 5. The intercom pairing queue is ‘Last-Come, First-Served’. If a headset has multiple paired headsets for intercom conversations, the last paired headset is set as first intercom friend.
SMH5-FM 10. SMH5-FM CONFIGURATION SETTING You can set the configuration of the SMH5-FM by the voice menu instruction as below. 1. To enter into voice configuration menu, press and hold the Jog Dial for 12 seconds until the LED shows solid blue and you hear high tone double beeps. You will also hear a voice prompt saying “Configuration menu”. 2. Rotate the Jog Dial clockwise or counter-clockwise to navigate between the menus. You will hear voice prompts for each menu items as below. 3.
SMH5-FM Note: 1. A fter assigning a phone number to one of three speed dials, you can continually assign another phone number to the rest of two speed dials. 2. You can assign phone numbers to speed dials in your PC. Please visit the Sena Bluetooth web site at www.sena.com for more information. 10.2 Enabling/Disabling RDS AF RDS AF allows a receiver to re-tune to a different frequency providing the same station has an additional frequency.
SMH5-FM 10.3 Enabling/Disabling Voice Activated Phone Answering Voice Prompt “VOX phone” Factory Default Enable Enable Tap the Phone Button Voice Prompt Disable Tap the Jog Dial Factory Default Disable Enable Tap the Phone Button Disable Tap the Jog Dial If this feature is enabled, you can answer incoming calls by simply saying a word loudly enough. For example, when you hear a series of beeps for an incoming call, you can answer the phone by saying “Hello” or any other word loudly.
SMH5-FM Note: If you use your SMH5-FM with the Bluetooth Audio Pack for GoPro or Prism, you can enable or disable this feature only during Normal Audio Recording Mode. This feature is automatically disabled while in Ultra HD (UHD) Audio Mode. 10.7 Delete all Bluetooth Pairing Information 10.
SMH5-FM 11. USING THE SMH5-FM 11.1 Volume Adjustment You can easily adjust the volume by rotating the Jog Dial. You will hear a beep when the volume reaches maximum or minimum level. The volume is set and maintained independently at different levels for each audio source even when you turn off and on the headset. For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume when you hear Bluetooth MP3 music.
SMH5-FM 11.3 Speed Dialing (1) Last number redial (2) Speed dial 1 (4) Speed dial 3 (5) Cancel (3) Speed dial 2 4. After selecting the last number redial menu, you will hear a voice prompt saying “Last number redial”. Then, to redial the last phone call number, tap the Phone Button or the Jog Dial. 5. To call one of the speed dials, rotate the Jog Dial clockwise or counter-clockwise to navigate between the menus until you hear a voice prompt saying “Speed dial (#)”.
SMH5-FM 11.4 Intercom Conversation 1. You can start an intercom conversation with any of intercom friends by tapping the Jog Dial: single tapping to intercom with the first intercom friend, double tapping with the second intercom friend, and triple tapping with the third intercom friend. 2. To terminate an intercom conversation, single tap the Jog Dial. Any intercom connection with any intercom friend will be terminated by a single tapping. A double or triple tapping will do nothing in this case.
SMH5-FM 11.6 Intercom Failure When you try to start an intercom conversation with an intercom friend who is already having an intercom conversation with another intercom friend or a mobile phone call with another person, you will hear a low tone double beep signifying a busy signal. You will also hear a voice prompt saying “Intercom failed, try again later”. In this case, you have to try again later.
SMH5-FM 1. Rotate while pressing the Jog Dial clockwise to search up the station dial or counter clockwise to search down the station dial. 2. I f the tuner finds a station while searching frequencies, it stops the seek function. 3. To save the current station, press and hold the Jog Dial for 2 seconds until you hear a voice prompt saying “Preset (#)?”. 4.
SMH5-FM 11.9 Stereo Music - To play or pause music, press and hold the Jog Dial for 1 second until you hear a double beep. - To track forward or track back, rotate while pressing the Jog Dial clockwise or counter clockwise. 27 English You can listen to stereo music by Bluetooth wireless stereo. The Bluetooth audio device must be paired with the SMH5-FM by following the Bluetooth Stereo Device Pairing instructions described in the 6.2 chapter.
SMH5-FM 11.10 Function Priority 11.11 Music Sharing The SMH5-FM operates in the following order of priority: You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation. When you terminate music sharing, you can go back to the intercom conversation.
SMH5-FM 11.13 Fault Reset 1. To restore the SMH5-FM to factory default settings, press and hold the Phone Button for 12 seconds until the LED shows solid red and you hear high tone double beeps. You will also hear a voice prompt saying “Factory reset”. 2. Within 5 seconds, press the Jog Dial to confirm reset. The headset will be restored to factory setting and switched off automatically. You will hear a voice prompt saying “Headset reset, good-bye”. 3.
SMH5-FM 12. UNIVERSAL INTERCOM You can have an intercom conversation with non-Sena Bluetooth headsets using the Universal Intercom function. Non-Sena Bluetooth headsets can be connected to the Sena Bluetooth headset if they support the Bluetooth Hands-Free Profile (HFP). The working distance may differ depending on the performance of Bluetooth headset that it is connected to. In general, it is shorter than normal intercom distance since it uses the Bluetooth Hands-Free Profile. 12.
SMH5-FM The SMH5-FM supports firmware upgrade function. Please visit Sena Bluetooth web site at www.sena.com to check the latest software downloads. 14. OPERATION QUICK REFERENCE Type Basic Function Mobile Phone Intercom Operation Button Duration English 13.
SMH5-FM Type Operation Play & pause music Music Track-forward & track-back Phone pairing Bluetooth Pairing Multipoint pairing Intercom pairing Button Duration LED — Beep Type Mid-tone double beeps Jog Dial 1 sec Jog Dial Rotating while pressing — — Phone Button 5 sec Blue & red alternatively flashing Mid-tone single beep & High tone triple beeps Jog Dial 5 sec Red flashing Multiple beeps Phone Button Tapping Blue flashing High tone double beeps Jog Dial 5 sec Red flashing
SMH5-FM FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
SMH5-FM Industry Canada Statement WEEE (Waste Electrical and Electronic Equipment ) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
SMH5-FM Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or damage to property. Product Storage and Management • Keep the product free of dust. It may damage mechanical and electronic parts of the product. • Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the battery, and/or melt plastic parts of the product. • Do not store the product in cold temperatures.
SMH5-FM • When using the product, drive at a low speed (slower than 35km/h) for safety. In addition, be certain to conform to laws regarding the use of communications devices while driving. • Do not put the product where it may hamper the driver's vision or manipulate it while driving. This may cause traffic accidents. • Before driving, fasten the product to the helmet, and double-check that it is fastened. Separation of the product while driving may cause damage to the product or accidents.
SMH5-FM Limited Warranty Limited Warranty Sena Technologies, Inc. (“Sena”) guarantees the product quality based on the technical specification stated in the product manual, and data regarding product warranty. Here, product warranty extends to the product only. Sena will not be liable for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or flaws that occur due to problems in manufacture.
SMH5-FM 4. You must be an adult who can take responsibilities for using the product. 5.
SMH5-FM Liabilities Disclaimer In addition to damages which may occur due to the use of the product, Sena will not be liable for damages of the product which occur due to the following events. • In the event the product is misused or used for purposes other than its intended purposes. • In the event the product is damaged because the user does not follow the content of the product manual. • In the event the product is damaged because it has been left unattended or has undergone any other accident.
SMH5-FM Warranty Service To obtain product warranty service, send the defective product, at your expense, to the manufacturer or the seller along with proof of purchase (a receipt that shows the purchase date, a product registration certificate of the Website, and other relevant information). Take necessary measures to protect the product. In order to get a refund or replacement, you must include the whole package as it was purchased.
1.5.0 www.sena.com User's Guide for Firmware v2.