User Manual
English
SMH5
27
11.12 Fault Reset
When the SMH5 is not working properly or is in faulty status for any
reason, you may reset by pushing the pin-hole reset button at the
back of the headset main unit. Insert a paper clip into the reset pin-
hole and press the reset button for a second with light pressure.
The SMH5 will be switched off after which time, you have to turn
the system back on and try again. However, this will not restore the
headset to factory default settings.
12. UNIVERSAL INTERCOM
You can have an intercom conversation with non-Sena Bluetooth
headsets using the Universal Intercom function. Non-Sena Bluetooth
headsets can be connected to the Sena Bluetooth headset if they
support the Bluetooth Hands-Free Prole (HFP). The working distance
may differ depending on the performance of Bluetooth headset that
it is connected to. In general, it is shorter than normal intercom
distance since it uses the Bluetooth Hands-Free Prole.
12.1 Universal Intercom Pairing
The SMH5 can be paired with non-Sena Bluetooth headsets for
Bluetooth intercom conversation. You can pair the SMH5 with only
one non-Sena Bluetooth headset; if you pair with a different non-Sena
Bluetooth headset, the previous pairing list will be removed.
1. Turn on the SMH5 and a non-Sena Bluetooth headset which you
want to pair with.
2. Press and hold the Jog Dial on the SMH5 for 8 seconds until the
blue LED ashes rapidly. You will hear a voice prompt saying
“Universal intercom pairing”.