User Manual

English
SMH5
33
Do not use the product near hazardous explosives. When it is near
any explosion hazards, turn off the power and heed any regulations,
instructions, and signs in the area.
When using the product, be certain to conform to laws regarding the
use of communications devices while riding.
Do not put the product where it may hamper the rider's vision or
manipulate it while riding. This may cause trafc accidents.
Before riding, fasten the product to the helmet, and double-check
that it is fastened. Separation of the product while riding may cause
damage to the product or accidents.
If the product is damaged, stop using it immediately. It may cause
damage, explosion, or re.
Battery
This product has an irreplaceable rechargeable battery inside.
Therefore, when using the product, make sure to adhere to the
following:
Never separate the battery from the product as this may damage
the product.
The battery performance may be reduced over time with usage.
In r
echarging the battery, make sure to use an approved charger
provided by the manufacturer. Use of a non-approved charger may
cause re, explosion, leakage, and other hazards may also reduce
the life time or performance of the battery.
Any 3r
d party USB charger can be used with Sena products if the
charger is approved by either the FCC, CE, IC or other locally
approved agencies that Sena accepts.
Do not use cigarette chargers other than the included cigarette
charger to charge the headset.
Stor
e the battery at temperatures of 15°C~25°C (59°F~77°F). Higher
or lower temperatures may reduce the capacity and life of the
battery, or may cause temporary non-operation. Do not use the
product in sub-zero temperature, because it may cause serious
reduction of the battery performance.
If you apply heat to the batter
y or throw it into re, it may explode.
Do not use the product with a damaged battery. It may explode and/
or cause accidents.
Never use a damaged charger. It may explode and/or cause
accidents.
Battery life may vary depending on conditions, environmental
factors, functions of the product in use, and devices used with it.